|
|
Post by Tanuki on Jan 21, 2018 17:49:03 GMT -5
Hellish, 25mph is what my buddy said about my sexpress! Thanks Benji, reading up your thread now. Heres my GET sExpress, wasnt very fast, but had a fun time putting together.  |
|
|
|
Post by Tanuki on Jan 28, 2018 23:11:45 GMT -5
Cleaned the carb real good. Decided on keeping it stock and real slow, just slam it with hardtail and fork chop.
|
|
|
|
Post by benji on Jan 29, 2018 2:06:08 GMT -5
I drilled a couple holes in my clutch on my stock one. Helped takeoff quite a bit.
|
|
|
|
Post by lilpinny on Jan 29, 2018 8:15:35 GMT -5
Cleaned the carb real good. Decided on keeping it stock and real slow, just slam it with hardtail and fork chop. Why ride when you can low ride? 😀 |
|
|
|
Post by hellish100 on Jan 29, 2018 19:00:53 GMT -5
Hellish, 25mph is what my buddy said about my sexpress! Thanks Benji, reading up your thread now. Heres my GET sExpress, wasnt very fast, but had a fun time putting together. Details on this build please! |
|
|
|
Post by Tanuki on Feb 1, 2018 3:03:29 GMT -5
Details! Immediately i spy 3 plumbing parts, my calling card. I honestly had my doubts it would really GET put together. I sold it back to the friend who gave it to me. I loved dragging the pegs on turns! Can somebody give me in depth detailed step by step illustrated paint by numbers dictated unabridged bilingual lesbiatronic instuctions on making this stocker shock a semi-hardtail with 8" between the holes? Thanks!  |
|
|
|
Post by Happypancake! on Feb 1, 2018 5:56:08 GMT -5
This thing Mr Balls?  1. Unscrew the yoke end of the shock 2. Pull off spring. 3. GET on your one of your other 3 scoots and haul your ass to Autozone and pick up theses:  4. Add washer - bushing - bushing - washer to stem 5. Screw the yoke back on. Tah dah !!!!!!! |
|
|
|
Post by Tanuki on Feb 1, 2018 20:48:01 GMT -5
9.8105R
Ebay time
|
|
|
|
Post by Happypancake! on Feb 1, 2018 21:07:34 GMT -5
What do you need?
|
|
|
|
Post by lilpinny on Feb 1, 2018 21:21:24 GMT -5
I kinda like the idea of a shock like that on a 50, now that I know what it is.
|
|
|
|
Post by spazter12 on Feb 1, 2018 21:35:37 GMT -5
I think the bushings. That's the PN from the pic you posted |
|
|
|
Post by Tanuki on Feb 1, 2018 23:37:23 GMT -5
Now what??  |
|
|
|
Post by Tanuki on Feb 1, 2018 23:38:36 GMT -5
Shit
|
|
|
|
Post by Tanuki on Feb 1, 2018 23:40:42 GMT -5
Did i unscrew the wrong end? Whats a yoke?
|
|
|
|
Post by benji on Feb 1, 2018 23:44:15 GMT -5
No no, I think you did it right. Just put a washer than a bushing and a washer on it, then put the bottom back on. Basically you'll be running that little urethane bushing as a spring/bump Stop
|
|
