|
|
Post by lilpinny on Jan 8, 2018 11:55:50 GMT -5
I lived in PA (Philly) for 2.5 years and I said never again will I live someplace so damn cold. brrrr.
|
|
|
|
Post by Happypancake! on Jan 19, 2018 22:02:01 GMT -5
  Tries many locations for the speedo but didn't like it on top. Uses a Autometer cup to hold a Ruck Speedo. Plan to mount turn signal indicator, high beam an temp lights in the cowl. I have some mini Koso turn signals coming in the mail. |
|
|
|
Post by lilpinny on Jan 20, 2018 13:57:18 GMT -5
Nice!
|
|
|
|
Post by jbjhillbilly on Jan 22, 2018 3:14:30 GMT -5
Damn! That is super clean looking. Well played!
|
|
|
|
Post by Happypancake! on Jan 24, 2018 20:04:15 GMT -5
 Got a plate today. Registered as a moped. $200 For registration! PA sucks.
|
|
|
|
Post by AtariGuy on Jan 24, 2018 20:15:13 GMT -5
Back in 2015, I bought a scoot (2006 tng venice) that had a plate for only its first year of its life. Took me 6 diligent months here in MN to try to find a title for it, then i finally got to register it with a new title. Took me 86 bucks for registration and i had to work out some crazy deal with the insurance company on top of it. To have any title/registration service done here, you need proof of insurance. Insurance companies around here are NOT keen on insuring a vehicle that dont have a title, has some kind of administrative impoundment (i still don't fully understand that term) and a bill of sale for a pile of scrap metal that don't run. I bought a... policy... for 1 month, $100 to just have a proof of insurance for it. Once it got plates and a title, i brought that info back to the insurance company and they applied my $100 to a legit moped policy... that's a headache!
|
|
|
|
Post by Happypancake! on Jan 26, 2018 22:24:46 GMT -5
   Pulled apart a Met speedo for the LED Temp and High Beam to mount in cowl. Also pulled apart a Vino 50 fuel gauge. Top is a Vino 50 fuel gauge. I cut off the pic but the only diff between the Met and Vino fuel gauge is that the Vino has a additional resistor. I cut the upper one off...  BAM! looks like it works. I'll need to drain half the tank down to confirm. |
|
|
|
Post by lilpinny on Jan 26, 2018 22:41:09 GMT -5
Right on!
|
|
|
|
Post by Happypancake! on Apr 8, 2018 21:55:34 GMT -5
 Got the LED turn signal to work. Had to pick up a couple of resistors. I'll eventually GET the Waffle back togther. |
|
|
|
Post by Tanuki on Apr 9, 2018 2:36:09 GMT -5
Resisters? That flasher you had my buy at napa didnt work for you?
|
|
|
|
Post by Happypancake! on Apr 9, 2018 4:43:16 GMT -5
Needed to add b/c I put LEDs on on all turns, front/back, and stop. Plus have the napa flasher.
|
|
|
|
Post by Happypancake! on Apr 10, 2018 19:32:09 GMT -5
 Posting Old TR How-To for Composimo Spring Installation in RRGS Forks. Tried to scan,PDF then IMGUR to post. Not the best EDITED by 90GTVert : I replaced the image. Here is the link to what was originally posted in case it's needed :
LINK |
|
|
|
Post by spazter12 on Apr 10, 2018 20:21:37 GMT -5
Posting Old TR How-To for Composimo Spring Installation in RRGS Forks. Tried to scan,PDF then IMGUR to post. Not the best Did you take that with your phone? I have scrolling screenshots. I may be able to help you if you send me the link. |
|
|
|
Post by Happypancake! on Apr 10, 2018 20:41:32 GMT -5
Posting Old TR How-To for Composimo Spring Installation in RRGS Forks. Tried to scan,PDF then IMGUR to post. Not the best Did you take that with your phone? I have scrolling screenshots. I may be able to help you if you send me the link. Looks better on pc. I’ll send u the pdf. |
|
|
|
Post by spazter12 on Apr 10, 2018 20:46:42 GMT -5
Damn. I tried uploading it and the screenshot looks great but it gets blurry with the compression.
|
|
