87' Iowa Edition Cyclone Spree
Jan 25, 2018 2:49:44 GMT -5
collinsd84, pinkscoot, and 1 more like this
Post by eclark5483 on Jan 25, 2018 2:49:44 GMT -5
So this latest Spree has been a work in progress for about 9 months now. I'm just about to cross the finish line with it, figured I'd share some photos. I'll update when it's 100% complete.
Engine wise, it sports a 48mm BBK that was professionally ported by the master himself Joe Daniels. A Tazland intake with Malossi reeds, Polini 17mm CP carb, MLM people's pipe.
This is the brother bike to my Iowa Hawkeye's Spree which can be found here:
hondaspree.net/phpBB3/viewtopic.php?f=16&t=33932
Just waiting on Spring to get here so I can run a few gas tanks on it for break in, then I plan on slapping it on the Dyno and see what kind of HP/Torque this little low geared beast can put out. My Iowa Hawkeye's Spree puts out over 4HP with the high geared 15:81 setup, this one utilizes a 12T gear so I expect that my HP number will be higher. It has much better pickup, but not as high top speed as the other one.
Engine wise, it sports a 48mm BBK that was professionally ported by the master himself Joe Daniels. A Tazland intake with Malossi reeds, Polini 17mm CP carb, MLM people's pipe.
This is the brother bike to my Iowa Hawkeye's Spree which can be found here:
hondaspree.net/phpBB3/viewtopic.php?f=16&t=33932
Just waiting on Spring to get here so I can run a few gas tanks on it for break in, then I plan on slapping it on the Dyno and see what kind of HP/Torque this little low geared beast can put out. My Iowa Hawkeye's Spree puts out over 4HP with the high geared 15:81 setup, this one utilizes a 12T gear so I expect that my HP number will be higher. It has much better pickup, but not as high top speed as the other one.
