|
|
Post by ravensguildassasin on Jul 23, 2011 23:25:52 GMT -5
yeah it is 70cc not 80cc you are right. it has been a long day for 80cc+ you need the next head up. but then you may run into issues still with the new head pushing the valves to far in. idk for sure it depends on the other parts used in the setup.
|
|
|
|
Post by ravensguildassasin on Jul 25, 2011 3:10:29 GMT -5
ok so strap wrench good in theory bad in use. it failed badly so i will be getting a corded impact from autozone they are 30.00 USD meh no big deal but still.
|
|
|
|
Post by 90GTVert on Jul 25, 2011 6:26:31 GMT -5
I bought a set of strap wrenches years ago hoping they'd be useful for the clutch and was less than pleased. They just hang on my wall and pretty much never come down.
|
|
|
|
Post by drawkward on Jul 25, 2011 7:15:29 GMT -5
I bought a set of strap wrenches years ago hoping they'd be useful for the clutch and was less than pleased. They just hang on my wall and pretty much never come down. Same here. Impact gun for the win. |
|
theo547
Scoot Enthusiast
Posts: 497
|
Post by theo547 on Jul 25, 2011 9:41:02 GMT -5
with The 3 or so clutches I've taken apart The last few months strap wrenches have worked great. Guess I'm just lucky.
|
|
|
|
Post by ravensguildassasin on Jul 30, 2011 16:21:54 GMT -5
BWAHAHAHAHAHAHAHHAHAHAHAHAH *cough cough* HAHAHAHAHAHHAHAHA
scooter got repoed last night the guy that traded it to me didn't make the last payment. got it back today he went paid it off and dropped it of at my work. but still. lame day.
|
|
|
|
Post by Fox on Jul 30, 2011 16:57:17 GMT -5
I bought a set of strap wrenches years ago hoping they'd be useful for the clutch and was less than pleased. They just hang on my wall and pretty much never come down. When I first got my scoot I used a chain pipe wrench to hold the clutch bell to loosen the nut. It worked but like your strap wrenches it's been collecting dust for years now that I have an impact. Like this:  I used a thick piece of metal with with two holes drilled in it to immobilize the crank to get the variator nut. Again it worked but it was a hassle. Those were the days...  It was very similar to this:   |
|
|
|
Post by ravensguildassasin on Sept 8, 2011 7:36:16 GMT -5
Project dead maybe trading for a 150cc scooter with the same miles on it.  |
|
|
|
Post by 90GTVert on Sept 8, 2011 7:58:03 GMT -5
Cause of death?
|
|
|
|
Post by ravensguildassasin on Sept 8, 2011 15:23:54 GMT -5
it may be traded to a friend for his 150cc scooter he just bought. he didn't know he needed a motorcycle license to drive it. so i will get a 150cc he will get a 50cc. the scooter it self is not dead just the project. i do not plan on correcting him on anything he thinks i want a free 150cc scooter. |
|
|
|
Post by 90GTVert on Sept 8, 2011 15:32:43 GMT -5
Oh OK. I probably should have understood that the first time around now that I read it again, but thanks for the details. Hope it goes through for you.
|
|
|
|
Post by ravensguildassasin on Sept 9, 2011 2:02:42 GMT -5
it looks like it will. now all it hinges on is the guy he is buying it from not skipping town with his money and the scooter.  the basic run down is he went and had a contract drawn up, paid the guy for scooter but the guy gets to use said scooter till the movers come hopefully friday 9/9/2011 lol. at such time as the movers show up he gets scooter i take said scooter he gets my 50cc green meany i get 150cc beast. going to be named doombringer.  |
|
|
|
Post by 90GTVert on Sept 9, 2011 5:41:25 GMT -5
If you get that sticker, get him this one...  |
|
|
|
Post by 2strokd on Sept 9, 2011 6:28:20 GMT -5
:lmao: :laugh:
|
|
|
|
Post by ravensguildassasin on Sept 9, 2011 10:53:38 GMT -5
i really should.
lmao
|
|
the basic run down is he went and had a contract drawn up, paid the guy for
