|
Post by 90GTVert on Jul 2, 2019 11:10:30 GMT -5
I've been pressure testing. It basically passed. Looks like the gauge that I just replaced my old one with is kinda junk. I had a small leak over a 30 minute test and didn't see any bubbles anywhere. Tested the tester with a plug in the end instead of the intake adapter over 30 minutes and it leaked even worse than when it was hooked to the engine. Clearly something wrong with it and inconsistent. Even went as far as to stick an inspection camera in the water jacket to see if I saw bubbles around the only thing I hadn't looked at. Really poor picture and I could only see the top area though. Still, called it good at that point. When I started all of this, I decided to finally make a video about pressure testing a 2T. I wanted to show a real world example. Well, that I did. I have been editing as a go and the video ended up around 45 minutes long. No one will accuse me of this one looking too easy. Prob no one will watch it either. That will take a long time to render since it's all 4K, but I'll put it up eventually for anyone that wants to watch a cluster f... first hand. I walked out to get the mail for a quick break from this yesterday and a letter from the Ocean City Police Department showed up. I instantly got sick to my stomach. "Oh no. They've found YouTube. What's the fine for 100 wheelies and 10 burnouts? Call off October. Dammit!" Turns out my parents forgot to register at the inlet parking kiosk one day so it was just a fine for them. That address had me sweating though. lol
|
|
|
Post by 90GTVert on Jul 3, 2019 4:24:58 GMT -5
|
|
|
Post by jloi on Jul 3, 2019 13:38:05 GMT -5
Well I watched it . now I know about something I didn't before . thanks .
|
|
|
Post by 190mech on Jul 3, 2019 23:46:11 GMT -5
We hunt for oxygen system leaks with balloons or cut off nitrile glove fingers over the ports,,that might work with an LC setup also,just stretch them over the cyl jacket inlet and outlet and hopefully they stay slack during the test...
|
|
|
Post by 90GTVert on Jul 4, 2019 21:46:03 GMT -5
|
|
|
Post by oldgeek on Jul 4, 2019 22:45:13 GMT -5
I dig those wheels even more now that they are mounted on the scoot!
|
|
|
Post by ryan_ott on Jul 4, 2019 23:02:36 GMT -5
I second that opinion. Once they have the black tire on them they don’t seem so overwhelming.
|
|
|
Post by 190mech on Jul 4, 2019 23:11:14 GMT -5
My EYES!Ha-Ha!!Gone from flat black "stealth" to ultra bright!!Good call Brent,,hope the deer notice you also...
|
|
|
Post by jloi on Jul 5, 2019 1:43:32 GMT -5
I think they look really great.. Gorgeous
|
|
|
Post by aeroxbud on Jul 5, 2019 2:29:50 GMT -5
With the polished forks, and new wheels. T2 is going to leave quite the impression, in its Smokey wake. 😁
|
|
|
Post by supascoot on Jul 5, 2019 3:43:48 GMT -5
Very slick looking.. like the white writing.
|
|
|
Post by 90GTVert on Jul 9, 2019 6:28:39 GMT -5
|
|
|
Post by ryan_ott on Jul 9, 2019 7:39:28 GMT -5
Those wheels really do make T2 look great. I don’t think they are over the top, just enough class.
|
|
|
Post by oldgeek on Jul 9, 2019 9:41:36 GMT -5
Naked is beautiful! This build of T2 is the best looking yet! **looks like the top mounting bolt for the airbox is missing?
|
|
|
Post by jloi on Jul 9, 2019 9:45:10 GMT -5
A thing of beauty . really.
|
|