|
Post by 90GTVert on Mar 27, 2021 9:18:15 GMT -5
I just got a Kenda rear tire for 13” for a reasonable price. Your favs are the Michelin right? Yeah. Since I'll have to buy 'em, it'll probably end up with Michelins unless there's a huge price difference.
|
|
|
Post by captincvmn on Mar 27, 2021 10:23:06 GMT -5
Not sure what size other than 13”. I want to get the 6022 Kozmik for mine but they’re 12”
|
|
|
Post by pinkscoot on Mar 27, 2021 14:21:26 GMT -5
Maybe he meant "just used until they were unusable"
|
|
|
Post by 90GTVert on Mar 27, 2021 17:26:36 GMT -5
Not sure what size other than 13”. 130/60-13 front and 140/60-13 rear. It's about $150 for a set of the Michelin Power Pure SC in those sizes.
|
|
|
Post by pinkscoot on Mar 27, 2021 18:02:30 GMT -5
|
|
|
Post by aeroxbud on Mar 28, 2021 12:24:48 GMT -5
Those Heidenau tyres look ok. But over here they are more expensive than the Michelin Power Pure SC. So I will be sticking with the Michelin Power on the aerox.
|
|
|
Post by pinkscoot on Mar 28, 2021 14:23:09 GMT -5
I was going to put Michelins on the sprint, City Grips or Pure Power SC and they weren't available. I haven't researched if Tires (tyres0 Have been hit with supply chain problems.
|
|
|
Post by aeroxbud on Mar 28, 2021 14:53:20 GMT -5
I was going to put Michelins on the sprint, City Grips or Pure Power SC and they weren't available. I haven't researched if Tires (tyres0 Have been hit with supply chain problems. It might be that they don't do those tires in that size. I couldn't find any here, but the vespa tyre is listed as an imperial size. The city grip and power tires are only available in metric sizes.
|
|
|
Post by twostroker on Mar 31, 2021 6:07:35 GMT -5
Nice wheels. I’d love to get a set for my build eventually. It would be awesome to see a video on how to do the conversion to the Aerox wheels on our clone engines.
|
|
|
Post by 90GTVert on Apr 1, 2021 6:32:23 GMT -5
I'm trying to decide if I want to get a piston elsewhere. It's not looking like I'll be getting it anytime soon from anyone that doesn't already have a C piston in stock. MaxiScoot has them, but over $150 with shipping for a piston is a lot... basically 150% of the regular price from ScooterTuning. RRD-Preparation has them a little cheaper, but whenever I try to put anything in the cart the site freezes for me so I'm not sure what their shipping charges are like or if they are good to deal with for US customers.
I did look at Wiseco and Pro-X catalogs. I didn't even get to checking pin diameter or compression height, because apparently 50mm bores are not common.
|
|
|
Post by ryan_ott on Apr 1, 2021 8:18:58 GMT -5
Vertex has some 50mm pistons and 50mm is somewhat common among saws. I can measure the one from the Airsal 77 I have later today.
|
|
|
Post by Lucass2T on Apr 1, 2021 8:33:05 GMT -5
RRD-Preparation has them a little cheaper, but whenever I try to put anything in the cart the site freezes for me so I'm not sure what their shipping charges are like or if they are good to deal with for US customers. I did look at Wiseco and Pro-X catalogs. I didn't even get to checking pin diameter or compression height, because apparently 50mm bores are not common. Don't buy from them. I am assuming their business is suffering from the pandemic since I ordered from them 2 months ago and got my stuff only yesterday with multiple parts just missing. They didn't specify why. They don't communicate one bit so it's a gamble when ordering from them... My suggestion would be to look into dirtbike and mx related catalogus just like you did.
|
|
|
Post by 90GTVert on Apr 1, 2021 8:51:57 GMT -5
Vertex has some 50mm pistons and 50mm is somewhat common among saws. I can measure the one from the Airsal 77 I have later today. I looked at their site and the only 50mm I found was for an RM85 with a 14mm pin.
|
|
pewpew
Scoot Enthusiast
Posts: 254
|
Post by pewpew on Apr 1, 2021 9:26:52 GMT -5
|
|
|
Post by captincvmn on Apr 1, 2021 11:10:46 GMT -5
When is the first car show of the season? What’s the deadline?
|
|