|
|
Post by Sitticuss on Nov 29, 2014 21:34:52 GMT -5
Hey that's known as classic television To each their own.  It just always makes me laugh... |
|
|
|
Post by Clank on Nov 30, 2014 2:10:54 GMT -5
|
|
|
|
Post by Clank on Nov 30, 2014 2:16:37 GMT -5
 Looks like they read the label...lol  I know it looks like a bad packaging job...but it was well packed in layers...  Again more proof of the Florida Ancient Ritual of the Scooter Build. The bare feet when around the precious scooter parts is still a mystery, but clear evidence of a true Florida Scooter Rider. |
|
|
|
Post by Sitticuss on Nov 30, 2014 13:46:39 GMT -5
Thread closed: thankx everyone
|
|
|
|
Post by jhobe6678 on Nov 30, 2014 13:48:31 GMT -5
Huh? What happened?  |
|
|
|
Post by Sitticuss on Nov 30, 2014 13:51:14 GMT -5
I am going to start a new thread....OK maybe not
|
|
|
|
Post by Sitticuss on Dec 13, 2014 11:35:26 GMT -5
 Fancy new lights... |
|
|
|
Post by Sitticuss on Dec 20, 2014 14:38:51 GMT -5
 My wife went to ride her scooter and was greeted by this..I'm guessing that since there is nothing on the right side that its bad. It's not even a year old....sigh |
|
|
|
Post by 90GTVert on Dec 20, 2014 14:51:35 GMT -5
If tapping on it doesn't work I'd have to draw a tach and fuel gauge on. Luckily it looks like you've still got the odometer, so you can use that for filling up if you know rough fuel economy.
|
|
|
|
Post by Sitticuss on Dec 20, 2014 15:29:57 GMT -5
If tapping on it doesn't work I'd have to draw a tach and fuel gauge on. Luckily it looks like you've still got the odometer, so you can use that for filling up if you know rough fuel economy. Regrettably my wife won't go for that...lol |
|
|
|
Post by Sitticuss on Dec 20, 2014 19:46:04 GMT -5
Some scrap parts and 4+ hours later.....  |
|
|
|
Post by niz76 on Dec 20, 2014 19:52:01 GMT -5
Woohoo! You Da Man!   |
|
|
|
Post by Sitticuss on Jan 23, 2015 10:01:59 GMT -5
|
|
|
|
Post by Sitticuss on Jan 23, 2015 10:31:14 GMT -5
Due to a throttle cable failure and ensuing crash...This project is due to be revamped. Since it was laid down and the throttle stuck wide open the top end is less than ideal. I think it would be like putting your scooter on the stand cranking the throttle wide open and coming back in a few minutes.
54mm tall cylinder stock 90cc crank short case 8 to 1 gear ratio
1K main spring/2k clutch springs all other cvt parts standard
stock 19mm mikuni carb 100mj free flow filter
10" wheels
to be replaced by
54mm tall cylinder 45mm stoker crank long case (formerly a 50cc) with a 13 to 1 (to start)
Hoca variator 6.4g 1.5k main 2k clutch springs
stock 19mm mikuni carb to start...maybe a 19 or 21mm dello(depends on what I can get for cheap)
12" wheels
|
|
|
|
Post by Sitticuss on Jan 23, 2015 10:39:08 GMT -5
I ordered the replacement panels and prepped the old ones for repainting. Unfortunately today is windy as heck so no painting. Only windy day I can remember lately. Hope its not a bad omen...lol
|
|
