|
|
Post by 90GTVert on Jan 21, 2014 11:56:17 GMT -5
Overall looks like you did pretty well.  |
|
|
|
Post by Sitticuss on Jan 22, 2014 18:20:06 GMT -5
Ordered a new piston kit...looks like i got the same gears as 90GTVert is his build. I'm going to leave them just as they are. Having some trouble finding the brake parts i need to redo the rear end as i want to keep my other motor in one piece. I rebuilt a 19mm carb to use. Modding the stock air box going to stick with it for this build.
|
|
|
|
Post by birdman on Jan 23, 2014 1:35:44 GMT -5
horizontal minarelli rips hard. Go full rAce everything LOL!!
|
|
|
|
Post by Sitticuss on Jan 23, 2014 9:50:33 GMT -5
one tough scooter.....  |
|
|
|
Post by nelson on Jan 23, 2014 15:12:52 GMT -5
too bad my build turned to poop..looks good bet it will be a hoot! let us know how she runs!
|
|
|
|
Post by Sitticuss on Jan 23, 2014 16:54:27 GMT -5
If i had the cash i would buy that motor off of you just for the parts. I hope you get some money out of that mess.
|
|
|
|
Post by Sitticuss on Jan 23, 2014 19:28:38 GMT -5
Got the motor mount bushings out today.....What a pain in the ***...Went to drain out the gear oil, at first i thought there wasn't any. Then i realized it was just to thick it wouldn't drain out of the plug.
|
|
|
|
Post by Sitticuss on Jan 24, 2014 11:04:33 GMT -5
which pink slip are we racing for??  |
|
|
|
Post by Sitticuss on Jan 25, 2014 20:48:29 GMT -5
Its been to cold for my wife to ride the scooter lately. Its just been sitting with the cover on it. She came in today while i was working on the 90cc engine. She was like "why did you take the engine off my scooter it was working fine." I told her it just needed some maintenance and i wanted to get it done while she wasn't using it. So my secret is still safe. I am waiting on parts to come in so....  |
|
|
|
Post by 90GTVert on Jan 25, 2014 21:06:26 GMT -5
lol "Maintenance." The piston diameter was under the service limit.
|
|
|
|
Post by Sitticuss on Jan 27, 2014 13:18:21 GMT -5
So Partsforscooters had all the parts i needed to install the rear brake without cannibalizing the parts off of my 50cc....Except the brake pin/pivot.....90GTVert was kind enough to send me a link with a part that I think would work but the shipping cost wow. But I do have a part number so thanks for the help.....  Ryan was also kind enough to give me a good deal on a pair of wheels and a mucho better starter clutch.....  |
|
|
|
Post by moofus02 on Jan 27, 2014 13:50:46 GMT -5
So Partsforscooters had all the parts i needed to install the rear brake without cannibalizing the parts off of my 50cc....Except the brake pin/pivot.....90GTVert was kind enough to send me a link with a part that I think would work but the shipping cost wow. But I do have a part number so thanks for the help..... Ryan was also kind enough to give me a good deal on a pair of wheels and a mucho better starter clutch..... View AttachmentDo you need the solid pin or the one the brake arm goes on? I think I have extras around. If so you can have for the shipping should be cheep Sent from my SPH-L720 using proboards |
|
|
|
Post by Sitticuss on Jan 27, 2014 14:06:23 GMT -5
the solid pin
|
|
|
|
Post by Sitticuss on Jan 27, 2014 14:10:33 GMT -5
|
|
|
|
Post by moofus02 on Jan 27, 2014 19:15:36 GMT -5
That's for a China motor or yamaha. Clone stuff I have
Sent from my SPH-L720 using proboards
|
|
