|
|
Post by boostcrzy on Apr 8, 2014 9:34:40 GMT -5
****Current Top Speed - 77mph GPS Verified**** (5/5/14)Heres my setup: 172cc GY6 (61mm BBK) A9 Cam 24mm Carb (118main/aftermarket needle/choke delete) New Racing CDI Open air filter free flow exhaust 115mm Variator 9.5g Dr.Pulley sliders Yellow Tq spring K&S Clutch I bought the Scooter as a partially complete project from another rider. He Stretched it and lowered it as well as did a few of the upgrades...after going through the whole bike and re-doing most of the work(including a TON of electrical) I am happy to say this thing is AWESOME! I am still dialing in the CVT but so far the top speed on flat level ground with no tail-wind is 72.6mph (GPS Verified) I expect to see a little more after a few more tweaks...but my real goal is to make this thing rocket from a stop...Im a drag racer at heart.....anyway....here she is!   
|
|
|
|
Post by 90GTVert on Apr 8, 2014 9:43:11 GMT -5
Very nice. How close to the S9 in a drag race?
|
|
|
|
Post by boostcrzy on Apr 8, 2014 10:33:13 GMT -5
Very nice. How close to the S9 in a drag race? it would be very close up to 50mph...I would say whoever gets the jump will win...for now...lol....heres a quick 0-50 vid i did on the vento... |
|
|
|
Post by thephranc on Apr 8, 2014 11:01:34 GMT -5
Thats cool.
Does the towering and stretching affect stability?
|
|
|
|
Post by 2strokd on Apr 8, 2014 11:32:43 GMT -5
It is cool! Like the stretch, no overkill. I have the same scoot with pretty much the same set-up I am looking forward to finishing this spring  |
|
|
|
Post by boostcrzy on Apr 8, 2014 11:46:22 GMT -5
Thats cool. Does the towering and stretching affect stability? its actually more stable in a straigh line.....but slow speed cornering is where you really feel the extra length.......its totally acceptable to me though. |
|
|
|
Post by boostcrzy on Apr 8, 2014 11:47:39 GMT -5
It is cool! Like the stretch, no overkill. I have the same scoot with pretty much the same set-up I am looking forward to finishing this spring sweet!....any pics of yours?....what setup will you be running?...I really want this thing to launch...so I have a red spring and more sliders to test with on the way.....I want to see some more rpm on the hit. |
|
|
|
Post by 2strokd on Apr 8, 2014 12:33:01 GMT -5
Nothing really... Its a pile of parts leaning against the wall  Engine is built but not installed.. Its a 172, crank, head, cam, etc. I really need to get back on it soon. I put it off last fall to drag race other scoots. |
|
|
|
Post by boostcrzy on Apr 8, 2014 14:58:51 GMT -5
I just ran my buddy in his turbo 240sx!...ha!....i jumped him...but hey.... a chase is a race!
|
|
|
|
Post by 2strokd on Apr 8, 2014 15:47:21 GMT -5
LOL, COOL!!! Ide love to race him on my scoot  |
|
|
|
Post by 90GTVert on Apr 8, 2014 15:52:23 GMT -5
|
|
|
|
Post by boostcrzy on Apr 9, 2014 17:29:13 GMT -5
Threw the red tq spring in and jetted the carb to 115 main....revs are up now about 500rpm....seems to like the higher rpm....The A9 cam is working!...haha
|
|
|
|
Post by 2strokd on Apr 10, 2014 10:04:14 GMT -5
Sounds good!
Might not hurt to mark the pullies with a sharpie or something to check for full belt travel.
|
|
|
|
Post by boostcrzy on Apr 10, 2014 10:15:24 GMT -5
Sounds good! Might not hurt to mark the pullies with a sharpie or something to check for full belt travel. yea I just did this morning....will check later to see where its hitting on the variator. I also noticed it has an 835mm belt....I think the general consensus is that a 842mm gets more travel from the CVT. Might give it a try if im not seeing full travel.  |
|
|
|
Post by 2strokd on Apr 10, 2014 14:42:54 GMT -5
Good thing for me to note, thanks! First fourpoke build so its going to be interesting when I finally get to it. I was looking at it more yesterday and I need a filter for the carb, complete exhaust, or at least a good header and I can make my own from there. And whatever ods an ins I run into while putting the boat back together. Its been down for a couple years and the tank was rusty when I got it Good thing parts are cheap! |
|
