|
Post by Jwhood on Nov 28, 2015 18:01:22 GMT -5
Thse morini are touchy,i just got my first mina several months ago and its way easier to tune and keep it where you want it,morini are a pain in the ass the slightest change in temp requires me to make slight adjustments to my a/f ratios especially when temps drop in the 30's that with the doppler alien eye filter
|
|
|
Post by triesandluth on Nov 28, 2015 18:36:25 GMT -5
I saw the chance of rain this evening before work, so I tried out the stock box with this set up. Maybe it's just the sound, but it feels reliable. Tomorrow or Monday I'm going to do the same mods to it that I did to the Super 9 airbox, leaving it reliable, safe in moist conditions, and quiet, all while giving a more than generous amount of airflow. I can tell it's running rich, but not bad enough to drastically affect performance. I figure it'll do until I make my leak down tester, and until Tuesday when I get my parts for the Super 9. But... I'm really considering porting this kit some. If y'all know where any links to good porting info are, please share. I tried to search some on here with slim luck.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 28, 2015 18:45:58 GMT -5
Just remember that 4T's do not seize...well...unless you forget to add oil.
Bill
|
|
|
Post by niz76 on Nov 28, 2015 20:37:36 GMT -5
|
|
|
Post by triesandluth on Nov 28, 2015 21:01:56 GMT -5
Just remember that 4T's do not seize...well...unless you forget to add oil. Bill Always trying to convert, Eh bill? Lol. I'm working a deal to get all the performance scrap, I mean parts, for the Agility. It'll be the best looking slow engine I have lol.
|
|
|
Post by triesandluth on Nov 28, 2015 21:02:45 GMT -5
Thanks! Now I've got something to read!
|
|
|
Post by 190mech on Nov 29, 2015 7:39:16 GMT -5
When you pull the top end off,send us some pics of the piston and cylinder..
|
|
|
Post by triesandluth on Nov 29, 2015 8:24:41 GMT -5
When you pull the top end off,send us some pics of the piston and cylinder.. Of the super 9? Or the tgb? I strayed off topic, I'm going to try my luck with porting the Super 9 malossi cylinder. But... I may try to do the tgb naraku cylinder afterwards, if I have positive results. Hell, maybe even if I don't have positive results. I'm considering buying a different kit for the tgb in the future.
|
|
|
Post by iwiketuddlz on Nov 29, 2015 12:36:19 GMT -5
My setup is uber sensitive to weather as well kinda annoying to be honest!! Lol
|
|
|
Post by 190mech on Nov 29, 2015 18:03:44 GMT -5
Uhh,I thought this thread was about a TGB,heck lets make this a 'twin' thread,pull both your cylinders and take some pics of the pistons and cylinders!!Just Kidding!!Honestly if you intend to do port work on either one,the existing port durations should be checked first with the head removed to determine just what mods are needed to get the most from your hard work...
|
|
|
Post by triesandluth on Nov 29, 2015 18:53:12 GMT -5
It is, I roam all over the place. Lol. I've been reading a lot it in the tech section, gonna print me up a degree wheel and check them out. I'm trying to find information of what I could go to before I start porting. I need to hit google, I honestly have no experience in durations and need to get a better understanding of them.
|
|
|
Post by 190mech on Nov 29, 2015 21:26:58 GMT -5
You should look up A G Bell's book,2 stroke performance tuning,,its dated,but fits very well in the scooter stuff!
|
|
|
Post by triesandluth on Nov 29, 2015 21:39:00 GMT -5
You should look up A G Bell's book,2 stroke performance tuning,,its dated,but fits very well in the scooter stuff! Will do! Maybe I can find the book in town, give my phone a rest...
|
|
|
Post by 90GTVert on Nov 30, 2015 6:45:22 GMT -5
|
|
|
Post by triesandluth on Nov 30, 2015 8:33:04 GMT -5
"Thread not found"... Moved, maybe?
|
|