|
Post by scootnewb on May 28, 2018 15:09:48 GMT -5
If the CDI is limiting you, wouldn't it be impossible to tune until that is sorted?
|
|
|
Post by magoconnor on May 28, 2018 15:25:06 GMT -5
The problem is the needle is fixed, I can move it up a bit with shims but I can't reallylower it. Or is there a way to lower it that I dont know of ?
|
|
|
Post by dexameth on May 29, 2018 12:45:12 GMT -5
I would get a different carb. I sell a true 20mm for the 139QMB, comes pre-jetted 91 main 32 idle. That 18mm should be okay, but without the tuneability of the needle, I would start with a different carb. FOLLOW ME
|
|
|
Post by magoconnor on May 29, 2018 22:50:39 GMT -5
That would be really nice, but with import taxes the carb would cost nearly cost 110 dollars!! Those damn taxes..
|
|
|
Post by magoconnor on May 29, 2018 23:11:32 GMT -5
Im thinking about putting a stock size head back on, but I only have a stock head gasket 39mm. I have to wait a week and a half for a 47mm gasket. Can I just cut the stock one to fit?
|
|