Keeway Matrix - A new build: Chapter 3 | 49ccScoot.com Scooter Forums

spaz12
Scoot Master!

Posts: 7,964

Location: Las Vegas, NV

Keeway Matrix - A new build: Chapter 3 Sept 3, 2016 11:14:54 GMT -5

Quote

Post by spaz12 on Sept 3, 2016 11:14:54 GMT -5

Sept 3, 2016 8:19:54 GMT -5 ryan_ott said:

3 day weekend, I'll get some time to get some alumnium chips flying. I'm thinking of painting these cases also. Spaz you just need some motivation!

Motivation? What, like crack? (scared)

www.youtube.com/watch?v=0eZRUFbfju8
49ccscoot.proboards.com/thread/16834/2005-zuma-aerox-motor
2005 Zuma 50 (Aerox 50 motor)
Malossi MHR Big Bore 77 bbk, Malossi RHQ 12mm crank, Roost 86 pipe, Keihin 28mm PWK,Stage6 reverse intake manifold, Stage6 30m forks, Polini rear shock, Aerox 50 wheels, much more to list and many more upgrades to come...
2008 Zuma 50
2012 Zuma 50 (sold)
2003 Derbi Red Bullet
2006 Metropolitan

ryan_ott
Scoot Master!

Posts: 5,195

Keeway Matrix - A new build: Chapter 3 Sept 3, 2016 22:53:13 GMT -5 via mobile 90GTVert and spaz12 like this

Quote

Post by ryan_ott on Sept 3, 2016 22:53:13 GMT -5

Got to pulling parts off of the old cases. Made lots of chips and got the cylinder base and one of the transfers done so far. I'm more then happy with the results so far. I'll finish up tomorrow. Now for some pics...

Outline scribed;

Precision

Open up and say aahhh

2008 Yamaha Zuma
2008 Metruck
2019 Yamaha MT07
1994 Yamasaki - RD250 swapped Ninja

Flip over and eat sh*t

ryan_ott Scoot Master! Posts: 5,195	Keeway Matrix - A new build: Chapter 3 Sept 3, 2016 22:56:00 GMT -5 via mobile Jwhood and spaz12 like this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by ryan_ott on Sept 3, 2016 22:56:00 GMT -5 Here is something I noticed with these cases, notice the extra mount on the bottom forward of the center stand mount... Lower mount maybe. Thoughts?
	2008 Yamaha Zuma 2008 Metruck 2019 Yamaha MT07 1994 Yamasaki - RD250 swapped Ninja Flip over and eat sh*t

spaz12
Scoot Master!

Posts: 7,964

Location: Las Vegas, NV

Keeway Matrix - A new build: Chapter 3 Sept 3, 2016 22:59:29 GMT -5

Quote

Post by spaz12 on Sept 3, 2016 22:59:29 GMT -5

My motor has those too. The Zuma motor doesn't, I don't think.

www.youtube.com/watch?v=0eZRUFbfju8
49ccscoot.proboards.com/thread/16834/2005-zuma-aerox-motor
2005 Zuma 50 (Aerox 50 motor)
Malossi MHR Big Bore 77 bbk, Malossi RHQ 12mm crank, Roost 86 pipe, Keihin 28mm PWK,Stage6 reverse intake manifold, Stage6 30m forks, Polini rear shock, Aerox 50 wheels, much more to list and many more upgrades to come...
2008 Zuma 50
2012 Zuma 50 (sold)
2003 Derbi Red Bullet
2006 Metropolitan

ryan_ott Scoot Master! Posts: 5,195	Keeway Matrix - A new build: Chapter 3 Sept 3, 2016 23:02:40 GMT -5 via mobile Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by ryan_ott on Sept 3, 2016 23:02:40 GMT -5 Wonder what they are for? They are not threaded.
	2008 Yamaha Zuma 2008 Metruck 2019 Yamaha MT07 1994 Yamasaki - RD250 swapped Ninja Flip over and eat sh*t

spaz12
Scoot Master!

Posts: 7,964

Location: Las Vegas, NV

Keeway Matrix - A new build: Chapter 3 Sept 3, 2016 23:03:57 GMT -5 ryan_ott likes this

Quote

Post by spaz12 on Sept 3, 2016 23:03:57 GMT -5

A different type of center stand? (dunno)

www.youtube.com/watch?v=0eZRUFbfju8
49ccscoot.proboards.com/thread/16834/2005-zuma-aerox-motor
2005 Zuma 50 (Aerox 50 motor)
Malossi MHR Big Bore 77 bbk, Malossi RHQ 12mm crank, Roost 86 pipe, Keihin 28mm PWK,Stage6 reverse intake manifold, Stage6 30m forks, Polini rear shock, Aerox 50 wheels, much more to list and many more upgrades to come...
2008 Zuma 50
2012 Zuma 50 (sold)
2003 Derbi Red Bullet
2006 Metropolitan

niz76 Scoot Master! Glitter Blaster I have the "Scooter Tuning Bug"! Posts: 6,103 Location: New Port Richey, FL	Keeway Matrix - A new build: Chapter 3 Sept 3, 2016 23:46:06 GMT -5 spaz12 likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by niz76 on Sept 3, 2016 23:46:06 GMT -5 Weird. I never really noticed these either but sure enough they're on a couple different Mina's I have here. Hmmm....
	Roketa AIR R50 JA90 Adly 96cc 2T ATV engine (Hoca 54mm) Polini adjustable two-shoe clutch 5g roller weights Home made Modified Hoca vari "Mini O.R." Technigas "Next R" 100cc exhaust Home made 26mm intake 21mm Polini CP Carb. 90 Main Jet 40 idle jet Free Flow "K&N style" Filter w/Rain Cover 11:1 Gear Ratio 61 mph GPS @ 9500 RPMs 260 Lb.Rider

90GTVert
Administrator

Posts: 41,620

Location: Preston, MD

Keeway Matrix - A new build: Chapter 3 Sept 5, 2016 10:06:58 GMT -5 moofus02, spaz12, and 1 more like this

Quote

Post by 90GTVert on Sept 5, 2016 10:06:58 GMT -5

I always notice when the one on the stator side is there, because I have to chop it off for the PG pipe to fit. All I know is I have no use for it so they keep on going into the recycling pile.

Brent
Life is better at high RPM.

ryan_ott
Scoot Master!

Posts: 5,195

Keeway Matrix - A new build: Chapter 3 Sept 13, 2016 20:34:46 GMT -5 via mobile 90GTVert, PIG, and 3 more like this

Quote

Post by ryan_ott on Sept 13, 2016 20:34:46 GMT -5

So where am I oh that's right these cases were a big pita. Bearing seats were not machined deep enough which meant my trans cover would not close. So I took my precision tools (dremel) and cut them deeper. Installed all new seals and bearings. Yay it fits! Fresh coat of paint and that brings us to... Waiting on parts. Hopefully this will be worth it in the long run. Also there was a change in pipe choice. I'll reveal it later.

2008 Yamaha Zuma
2008 Metruck
2019 Yamaha MT07
1994 Yamasaki - RD250 swapped Ninja

Flip over and eat sh*t

spaz12
Scoot Master!

Posts: 7,964

Location: Las Vegas, NV

Keeway Matrix - A new build: Chapter 3 Sept 13, 2016 20:48:13 GMT -5

Quote

Post by spaz12 on Sept 13, 2016 20:48:13 GMT -5

Have you decided on a color for the cvt cover?

www.youtube.com/watch?v=0eZRUFbfju8
49ccscoot.proboards.com/thread/16834/2005-zuma-aerox-motor
2005 Zuma 50 (Aerox 50 motor)
Malossi MHR Big Bore 77 bbk, Malossi RHQ 12mm crank, Roost 86 pipe, Keihin 28mm PWK,Stage6 reverse intake manifold, Stage6 30m forks, Polini rear shock, Aerox 50 wheels, much more to list and many more upgrades to come...
2008 Zuma 50
2012 Zuma 50 (sold)
2003 Derbi Red Bullet
2006 Metropolitan

ryan_ott Scoot Master! Posts: 5,195	Keeway Matrix - A new build: Chapter 3 Sept 13, 2016 20:49:40 GMT -5 via mobile spaz12 likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by ryan_ott on Sept 13, 2016 20:49:40 GMT -5 I'm thinking black but I need to vent it first.
	2008 Yamaha Zuma 2008 Metruck 2019 Yamaha MT07 1994 Yamasaki - RD250 swapped Ninja Flip over and eat sh*t

PIG Scoot Pro Posts: 1,869	Keeway Matrix - A new build: Chapter 3 Sept 13, 2016 21:07:27 GMT -5 via mobile ryan_ott and spaz12 like this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by PIG on Sept 13, 2016 21:07:27 GMT -5 I'm gonna guess something from roost for a pipe.
	2010 Zuma Stage6 r/t 95cc, Stage6 r/t crank, Stage6 95cc Big Bore Pipe,Trenched and Port Matched Cases, MVT DD19 Iggy, MXS Intake, Keihin 35mm, UNI air filter, 9-1 gear ratio, Malossi Overrange, Dr.Pulley HIT Clutch, Stage6 433 Clutch bell 2002 Zuma (Pre-Bug) MXS Race 70cc, S6 R1400 Pipe, 28mm PWK, Doopler S1R Crank, S6 'Big Valve Intake' 11-1 gear ratio, Malossi Overrange

'O'Verse
Scootaholic!

1cc = 1mph

Posts: 2,603

Keeway Matrix - A new build: Chapter 3 Sept 13, 2016 21:13:18 GMT -5

Quote

Post by 'O'Verse on Sept 13, 2016 21:13:18 GMT -5

Does anybody on this forum have one like it yet?

(1993) Yamaha Jog-Complete Malossi “Rc-One” 94cc engine-Powder coated frame & 13″Gyronectics black diamond rims-Aluminum Forks, triple tree, axle & frame braces-Malossi RS1 rear shock-Renthal handlebars-Str8 neck short-Adelin levers, front caliper, & brake cables, R & D Italy front & back discs-Yamaha Zuma bolt on radiators-Stage6 dual temp/ tach gauge, & kickstarter-Koso in line water temp. sensor-Custom sleeved wiring-Tusk enduro rechargeable lighting kit.

ryan_ott Scoot Master! Posts: 5,195	Keeway Matrix - A new build: Chapter 3 Sept 13, 2016 21:14:14 GMT -5 via mobile Jwhood and spaz12 like this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by ryan_ott on Sept 13, 2016 21:14:14 GMT -5 I had a R77 ordered but customs didn't want me to have it so they sent it back.
	2008 Yamaha Zuma 2008 Metruck 2019 Yamaha MT07 1994 Yamasaki - RD250 swapped Ninja Flip over and eat sh*t

ryan_ott Scoot Master! Posts: 5,195	Keeway Matrix - A new build: Chapter 3 Sept 13, 2016 21:17:12 GMT -5 via mobile 190mech, Jwhood, and 3 more like this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by ryan_ott on Sept 13, 2016 21:17:12 GMT -5 I guess we're playing guessing games.. I'll be building something between a C21/C30 for this one.
	2008 Yamaha Zuma 2008 Metruck 2019 Yamaha MT07 1994 Yamasaki - RD250 swapped Ninja Flip over and eat sh*t