06jog
Scoot Member
2006 Yamaha Jog
Posts: 86 
Location: Sydney
|
Post by 06jog on Mar 21, 2016 18:27:26 GMT -5
Hi All I received some more bits today Filter Spark Plug Brake Pads Main Jets  Need to get the following but not sure what or where from 15x12 rollers in 6.5g standard and a couple sets for tuning say 1 size lower 6g and 1 size higher 7g Belt too many options 788mm/796mm803mm x 16mm/16.5mm/16.6mm/17mm x 28/30 standard and kevlar contra 1000, 1500, 2000 clutch springs as above i will be stick with the stock Jog variation and torque drive as i think i can still get more performance out of it with some tuning. The only mod to the stock scooter is the CF Posh CDI and when i put the better filter on. Exhaust was not restricted. |
|
|
|
Post by spaz12 on Mar 24, 2016 19:01:24 GMT -5
Tsimi told me about the sale that they are having at scooter attack and that it's only going on for a few days. Anyway, didn't want to miss the chance to save 30 dollars on a part that I need. Thanks Tsimi! A 280mm Stage6 disk  I also have a set of Brembo RCS brake and clutch (dual disk brakes) master cylinders on the way.  I found a really nice Frando caliper and Frando steel braided lines as well. I'll be ordering those in the next couple of weeks. Once I get a few more parts then I'll start a build thread on the 05, which has been a long time coming together. |
|
|
|
Post by Senna1Rossi on Mar 25, 2016 15:36:35 GMT -5
^^^ WAHT THE FARG, SPAZ!! YOU BUILDING A SUPERBIKE??
WOW... drool drool
|
|
|
|
Post by Senna1Rossi on Mar 25, 2016 15:39:28 GMT -5
sheesh, and only thing I got was the LED running light / turn signal for me GTS. Looks super cool, at least  |
|
|
|
Post by spaz12 on Mar 25, 2016 23:21:16 GMT -5
^^^ WAHT THE FARG, SPAZ!! YOU BUILDING A SUPERBIKE?? WOW... drool drool A track bike with slicks and all that I'm going to run on the streets. I'm also teaching myself how to make split molds now so that I can make new body panels in the shape that I want because I can't stand the shape of the Zuma panels. |
|
|
|
Post by spaz12 on Mar 27, 2016 20:11:45 GMT -5
Just ordered an adapter that will let me fit a 4 piston caliper on the rear instead of the 2 piston   I'll now be running a matching set of Frando HF-1's  I also got a shock riser hoping to make more of an aggressive stance by raising the rear and lowering the front by raising the tubes in the tree.  |
|
|
|
Post by 2stroked on Mar 27, 2016 20:40:10 GMT -5
Ordered an aluminum intake with neoprene bushings and a steel support brace for my Honda Helix. Gotta love having a power sports shop close, just walked in and ordered. Seems the CN250 intake is a very common P.O.S. that easily tears.
Tried finding one online, but could only find rubber stock adapters. I figured its worth fifty bux, to not go through this again.
|
|
|
|
Post by mclark999 on Mar 29, 2016 11:28:39 GMT -5
Ordered an OLED display for my Arduino based dash supplement that I'm engineering
|
|
|
|
Post by ryan_ott on Mar 29, 2016 11:45:21 GMT -5
Ordered a Dr pulley HiT clutch for the elite  |
|
|
|
Post by spaz12 on Mar 29, 2016 11:49:08 GMT -5
Ordered a Dr pulley HiT clutch for the elite Me want  |
|
|
|
Post by moofus02 on Mar 29, 2016 12:04:52 GMT -5
Ordered a Dr pulley HiT clutch for the elite Me want The elite or the clutch lol |
|
|
|
Post by ryan_ott on Mar 29, 2016 12:14:26 GMT -5
$200 shipped at partsforscooters.com sale ends at the end of the month. You can get the clutch cheaper but my bell is shot so I needed the set.
|
|
06jog
Scoot Member
2006 Yamaha Jog
Posts: 86
Location: Sydney
|
Post by 06jog on Mar 29, 2016 13:42:29 GMT -5
Hi
Just bought a Yasuni Z pipe for the Jog. Along with a Malossi Multi Variator
|
|
|
|
Post by spaz12 on Mar 29, 2016 14:02:34 GMT -5
Me want The elite or the clutch lol Haha both! The clutch though |
|
|
|
Post by pinkscoot on Mar 29, 2016 17:15:56 GMT -5
I picked up a spare motor for my Hyosung SF 50. It was $100 on eBay and looked to be in good shape. It may be my build motor and keep the other one stock.
|
|
