|
|
Post by 'O'Verse on Feb 8, 2018 9:47:21 GMT -5
I'm thinking your gonna want to use an open filter on the Roost set up anyway. Just an educated guess but that carb, pipe, and cylinder combo is gonna want to breathe A lot ! Not saying anything bad about your airbox. It's bad ass for a stock replacement. But your probably gonna need an open filter or barely anything restricting the air flow intake. Your gonna be shooting from 0-14,000+ rpms in a split second. Hopefully you get it to work. But I'd save that bad boy for later and just go open filter.  |
|
|
|
Post by tsimi on Feb 8, 2018 10:07:11 GMT -5
Lucass2TNo worries. I'll figure out something when the time comes. 
|
|
|
|
Post by tsimi on Feb 13, 2018 5:35:26 GMT -5
Got my grinding bits. Now that should be plenty to get the cases done.  There was something else in the post box today. An unexpected surprise.  Not sure why I deserve this, heavy!, package but I gladly accept it. Thanks so much Raizer for keeping my blood sugar high in these cold days. I have never seen any of the sweets you send. Looking forward to try them. |
|
|
|
Post by Raizer on Feb 13, 2018 6:46:40 GMT -5
You've done so much to help me out with Gyro parts, it was the least I could do to send you some classic NZ treats!
|
|
|
|
Post by Lucass2T on Feb 13, 2018 17:56:37 GMT -5
Best-community-ever!
|
|
|
|
Post by 'O'Verse on Feb 24, 2018 23:50:47 GMT -5
Bro. Getting anxious here. Your gonna be the only guy on this forum with a Roost cylinder thus far. This thing has to rip.
|
|
|
|
Post by tsimi on Feb 25, 2018 0:54:17 GMT -5
I hope it will. That is if the cylinder ever comes. Just a bit more patience.
Meanwhile, thanks to benji, I could score a front fork assembly from an Aerox pre 2002. Those suppose to fit a Prebug and maybe the Jog aswell which would allow me to use my Aerox front wheel.
Will know for sure once I received it. The triple tree shaft has a length of 34cm and 26mm ID which is what your fork from KN had.
|
|
|
|
Post by 'O'Verse on Feb 25, 2018 13:56:36 GMT -5
I hope it will. That is if the cylinder ever comes. Just a bit more patience. Meanwhile, thanks to benji, I could score a front fork assembly from an Aerox pre 2002. Those suppose to fit a Prebug and maybe the Jog aswell which would allow me to use my Aerox front wheel. Will know for sure once I received it. The triple tree shaft has a length of 34cm and 26mm ID which is what your fork from KN had. Yes. Yes it is. Definitely anticipating the aerox fork install as I was just recently led towards that direction for my Jog. For added wheel clearance. Yeah I was hoping you heard something or other about your cylinder. I can't wait to see this thing in your pics. I just seen a new Roost cylinder. It had a black head on it like Bidalot.  |
|
|
|
Post by tsimi on Mar 7, 2018 16:59:08 GMT -5
Just got word from the shop. Roost kit has arrived at their store and is now been preped for shippig. Finally!
|
|
|
|
Post by PIG on Mar 7, 2018 22:11:04 GMT -5
Do you already have everything else you need for the build?
|
|
|
|
Post by tsimi on Mar 7, 2018 22:13:46 GMT -5
Do you already have everything else you need for the build? Yes! That's the great thing. Even the tools I have locked and loaded. Ready to go here. Maybe a few screws and gaskets to order but nothing that i can't get within 2-3 days here. |
|
|
|
Post by tsimi on Mar 10, 2018 8:11:53 GMT -5
Just received shipping confirmation and tracking number!  |
|
|
|
Post by 'O'Verse on Mar 10, 2018 14:33:32 GMT -5
Make sure you take plenty of pics. Transfers, casting, head, etc  |
|
|
|
Post by tsimi on Mar 20, 2018 5:34:30 GMT -5
Roost kit has been released from customs today and should arrive somewhere this week. Boxes are piling up in my small hobby room.  |
|
|
|
Post by tsimi on Mar 23, 2018 5:57:53 GMT -5
 Roost is in da house!!!!!!  Pics and more coming asap.
|
|
