|
|
Post by benji on Apr 24, 2019 22:12:57 GMT -5
Dumb question, which model of torsen are you using for this build? Sorry i'm late to the game I got this used from Ryan, so whatever he says is probably true. But, I'm pretty sure Polini makes one for the u.s. zuma. They make a few of them. You can probably find one for whatever motor you have without having the mod it. |
|
|
|
Post by benji on Apr 24, 2019 22:16:08 GMT -5
Eventually I'll make a small shelf to sit in the bucket and give me some space for tools and oil Kydex...   I'm probably going to use ABS plastic. I use it a lot at work, and I know it pretty well. You can heat it up and bend it like that stuff, but you have to get it pretty warm. |
|
|
|
Post by benji on Apr 27, 2019 19:34:14 GMT -5
By the way, if someone with a Zuma wants aerox wheels, let me know. I've got a full set available with front fork, and they're aerox 100 wheels so they're basically bolt on. Gonna be spendy, like $600 I think.
|
|
|
|
Post by hellish100 on Apr 28, 2019 12:49:56 GMT -5
PM sent
|
|
|
|
Post by aeroxbud on Apr 28, 2019 13:25:34 GMT -5
By the way, if someone with a Zuma wants aerox wheels, let me know. I've got a full set available with front fork, and they're aerox 100 wheels so they're basically bolt on. Gonna be spendy, like $600 I think. I have been looking for a Aerox 100 rear wheel for about 6 months for Happypancake! not any for sale here now. Even tried a couple of breakers that have a 100cc. No wheels left, and not been one on eBay. Was never a very popular model here. And since they stopped making them in 2004 its getting hard to find them. |
|
|
|
Post by benji on May 5, 2019 12:07:06 GMT -5
Just swapped the flatslide out for my old 21mm pwk. Runs waaaay better, don't even know why I tried something else.
This thing is FAST. The hard lowered front suspension is a liability now. The bike gets up to 60 or so real quick, and I haven't even dialed in the jets or rollers yet.
|
|
|
|
Post by benji on May 18, 2019 17:00:51 GMT -5
Put it back together and did a little turning. I have a 112 Main Jet in the 21 mm pwk now. Pretty good I think.   I love how much clearance this pipe has. |
|
|
|
Post by benji on May 21, 2019 3:11:12 GMT -5
 No real tuning. Didn't touch the cvt, didn't swap the belt, still don't have the carb dialed, still not quite broken in. I'm pretty sure 65 will be easy, maybe close to 70. |
|
|
|
Post by benji on Jun 3, 2019 0:18:56 GMT -5
I just dropped the pilot jet down to 30, mixture screw at 3/4 turn and jjh needle in middle notch, and it still fires up first kick with no choke. Main jet at 112, 21mm pwk. 30/112 seems lean to me, but I am running a 'small' 21mm pwk. I need to ride it a little cuz I may have to up the main now. Off-idle response is way better and crisper now.
|
|
|
|
Post by benji on Jun 9, 2019 10:03:10 GMT -5
Went riding around yesterday and it felt good, nice and snappy. I think I like the 30pj. I'm actually going to use this carb on another bike and swap it with an oko I think, maybe a 24mm.
I've also been thinking about swapping the rear wheel with a keisler 5" wide wheel, and/or maybe swapping to a 150/70-13 tire.
|
|
mattyslimz
Scoot Enthusiast
Posts: 222
Location: Northern Virginia
|
Post by mattyslimz on Jun 9, 2019 21:46:15 GMT -5
A 24mm sounds good.. are the wheels sold?
|
|
|
|
Post by ryan_ott on Jun 9, 2019 22:02:38 GMT -5
A 150/70 seems like too much sidewall, I’m at 140/60 and it’s near perfect. I think 150/60 or 50 would be the ticket.
|
|
|
|
Post by benji on Jun 10, 2019 9:16:12 GMT -5
A 150/70 seems like too much sidewall, I’m at 140/60 and it’s near perfect. I think 150/60 or 50 would be the ticket. I can't seem to find em. 150/70 is the only 13" tire I can find in 150mm width. Tire sizes for bikes are weird. |
|
|
|
Post by benji on Jun 10, 2019 9:17:43 GMT -5
A 24mm sounds good.. are the wheels sold? no, I just like the bigger rear wheel keisler has. I do know someone who wants aerox wheels on his Zuma but the adapter is hard to find. I may have to make one out of a Zuma wheel. |
|
mattyslimz
Scoot Enthusiast
Posts: 222
Location: Northern Virginia
|
Post by mattyslimz on Jun 10, 2019 9:35:17 GMT -5
A 24mm sounds good.. are the wheels sold? no, I just like the bigger rear wheel keisler has. I do know someone who wants aerox wheels on his Zuma but the adapter is hard to find. I may have to make one out of a Zuma wheel. Ok, if they don’t sell I’m surely interested and PayPal ready or whichever your preferred payment. |
|
