|
|
Post by teddy554 on Dec 31, 2011 12:31:34 GMT -5
|
|
vvtr
Scoot Enthusiast
Posts: 243
|
Post by vvtr on Dec 31, 2011 12:36:12 GMT -5
ring side up on the gasket.... not that it matters tbh. & the wavy ring is supposed to go under the bottom ring to force it out but the best place for it is in the bin imo lol  |
|
|
|
Post by jmkjr72 on Dec 31, 2011 13:08:01 GMT -5
yeah that wavy ring is just more crap that can break off and end up trashing the engine
|
|
|
|
Post by teddy554 on Dec 31, 2011 13:48:15 GMT -5
thanks guys now i can get started
|
|
|
|
Post by teddy554 on Jan 8, 2012 22:18:27 GMT -5
broke scooter down to install no name iron bbk that i bought from scrappydogs and would not fit. The sleeve on the cylinder would not fit inside the case of motor.  but thats alright they are refunding money and now have 47.6 airsal bbk on its way and 19mm arreche carb coming and will keep posting pichttp://i1111.photobucket.com/albums/h479/teddyc554/IMG_20111231_195502.jpg |
|
|
|
Post by teddy554 on Jan 8, 2012 22:22:01 GMT -5
i do have a question about the intake bolts it has three hex bolts and another that looks blank what is this and how do deal with this to replace intake  |
|
|
|
Post by jmkjr72 on Jan 8, 2012 22:27:27 GMT -5
what year is that it looks like they are working towards not being able to mod them
i would cut a slot in it and take it out with a screw driver
if you re replaceing the intake you might be able to cut it off at the top of the intake and use a bolt/stud extracter
|
|
|
|
Post by teddy554 on Jan 8, 2012 22:50:57 GMT -5
i just bought it 30days ago. maybe thats why my bbk woundnt fit in the motor maybe. thanks for the advice on bolt. There was a wire from the cvt case that went to clutch bell to cdi to keep scooter from go over 30 mph took that off
|
|
|
|
Post by 2strokd on Jan 10, 2012 5:47:06 GMT -5
They are trying all kinds of weird stuff these days, sheez! Maybe a set of needle nose vice grips will get it as well?
|
|
vvtr
Scoot Enthusiast
Posts: 243
|
Post by vvtr on Jan 10, 2012 14:07:56 GMT -5
what year is that it looks like they are working towards not being able to mod them i would cut a slot in it and take it out with a screw driver if you re replaceing the intake you might be able to cut it off at the top of the intake and use a bolt/stud extracter a mate's tgb was like that... with 2 shear bolts on the reed block. bit of a pain really as the reed petals are a service item. cutting a slot will get them out, as will a sharp tap on the side with a broken drill bit. then replace them with ordinary bolts or cap head (allen) screws. the peugeot i have uses a lot of Torx bolts too. i suppose getting into chinese, jap, korean & euro scoots means the usa crew have to buy metric tools now.... looks like the harley owners will be buying metric spanners as well soon when honda buy them out! :lol2: |
|
|
|
Post by teddy554 on Jan 12, 2012 13:20:53 GMT -5
Just got my new airsal bbk cant wait to get off work to start install it  |
|
|
|
Post by teddy554 on Jan 13, 2012 6:11:01 GMT -5
Got my kit installed and scooter running great at idle. It was raining last night so i never got the chance to make any runs with it. Getting the exhaust on was such a pain in the ass, it to more time putting my exhaust on then putting bbk on. But i am done. Could not have done it with out all the help of 49cc and the how to's and all of the great answer to Questions. Thanks everyone for all the help and knowledge shared with me
|
|
|
|
Post by 90GTVert on Jan 13, 2012 8:58:10 GMT -5
Let us know if you need anything while tuning the rest of the carb or trans.
|
|
|
|
Post by 2strokd on Jan 13, 2012 9:56:13 GMT -5
Sounds allot different with an aluminum cylinder huh? I like the "ting, duh, ding, ding." Curious to know how well it does as i have that same kit ive yet to try. |
|
|
|
Post by teddy554 on Jan 14, 2012 11:15:54 GMT -5
yes it sounds great, i am having trouble with the adjustments of the carb. it runs fine at full throttle for a couple of seconds then it does like a little jerking, like its not getting enough fuel and wont go any faster. My jets i ordered are a little shorter then stock maybe like 2mm or a little more i think it runs fine until gas in the float bowl gets to low and it not getting enough gas so starts to sputter. Besides that runs great on the stand i can hit throtle and revs up and down perfectly sounds great and the power is just crazy,
|
|
