Triton

[Reign]

It's not really a race motor, just my everyday driver that I'm looking to get the most amount of performance I can out of.

[vvtr]

when i saw triton i thought old school thumper!!! wondered wtf you were doing to it lol!
good luck
got my eyes on this one!

[90GTVert]

I'm happy to see some updates. ;D Check this link out (let it load after you click so it'll just take you to the right bit) and then let us know if you need more help finding where you wanna be.

49ccscoot.proboards.com/index.cgi?action=display&board=yamajog&thread=1712&page=2#30229

[Reign]

I managed to lose one of my head bolts within the last few months. Any of you know where I can get a flanged 7mm x 1.0 pitch nut? Or do any of you have a spare laying around? Thanks.

[90GTVert]

I don't have any spares, been meaning to pick some up myself to replace the rusty ones I have. Yamaha dealer might have them, or at least can get them. A&J has 'em....

www.kaseaparts.com/skyhawk-90-quad-cylinder-c-345_24_109.html

Could get a nut from a hardware store and a washer in a pinch or special order possibly from a hardware store or online fastener supplier.

[jmkjr72]

i would think you can run into fastenal or fleet farm and get that

well farm and fleet down by you i know they have a pretty good selection of odd nuts and bolts in there metric cabnit

[Reign]

Jan 3, 2012 14:15:58 GMT -5 jmkjr72 said:

i would think you can run into fastenal or fleet farm and get that

well farm and fleet down by you i know they have a pretty good selection of odd nuts and bolts in there metric cabnit

I was at the Ace here, which has the biggest nut and bolt selection of any of the other places around here. They had the right size nut, but not flanged. All the flanged ones were either M6 or M8

[190mech]

A plain nut with a heavy flat washer will do just fine...

[vvtr]

Jan 3, 2012 12:53:32 GMT -5 Reign said:

Any of you know where I can get a flanged 7mm x 1.0 pitch nut? Or do any of you have a spare laying around? Thanks.

if you are still stuck let me know & i'll post you a couple.

you coud just run a tap through an m6 or 1/4 nut?

can get any standarp pitch metric fasteners here, but sometimes struggle a bit with metric fine as not many people use them.

[Reign]

Finally got the Ninja and Triton out of storage, since it's been so great weather-wise lately. Then I noticed that my license expired in January, so I can't ride either! At least I can stare at them and work on them :laugh:

[bucket6429]

can u send me a link to the instructions to make that scoop on the fan

[90GTVert]

Here's how I did mine...
49ccscoot.proboards.com/index.cgi?board=gentech&action=display&thread=394

[bucket6429]

thanks