|
|
Post by oldgeek on May 5, 2015 20:55:43 GMT -5
I'm assuming you checked the pipe. Yes, but I did not check the silencer, so I will deff do that before splitting them. |
|
|
|
Post by oldgeek on May 5, 2015 20:59:16 GMT -5
I think I would fish around with a magnet stick in the bottom end and see what I could pick up. I have cracked a case when a piece of skirt wedged between case and crank, that sucked! I guess it depends on how valuable your time is? It's likely nothing is in there but if there is and you get it all together... I have not tried a magnet yet, but I will. I did look for it with an inspection camera, but I did not find anything. It should be 1/2 of the top ring, still intact, somewhere. |
|
|
|
Post by nelson on May 5, 2015 21:02:58 GMT -5
It is likely it broke into pieces. I would fish and see if I found pieces.
|
|
|
|
Post by oldgeek on May 5, 2015 21:17:53 GMT -5
Here is another picture of the kit.  |
|
|
|
Post by 2TDave on May 6, 2015 5:10:47 GMT -5
I like the sticker!
|
|
|
|
Post by oldgeek on May 8, 2015 22:10:26 GMT -5
I wondered who would notice. Too many scooter tuning.ca stickers laying around, and boredom created that.  |
|
|
|
Post by Elektrey on May 8, 2015 22:27:50 GMT -5
Great scott!
|
|
|
|
Post by thatcrazyguy on May 9, 2015 15:45:59 GMT -5
Did you photoshop that or does it really say ScottTuning? Haha I need one of them as my name is Scott
|
|
|
|
Post by oldgeek on May 9, 2015 16:20:43 GMT -5
Did you photoshop that or does it really say ScottTuning? Haha I need one of them as my name is Scott I started with 2 stickers. cut the "T" from one, and used it to cover the last "O" on another sticker. A little more trimming, and Scott Tuning is born! LoL! I hope the SCOOTERTUNING.CA guys have a sense of humor! The rabbit on the sticker is waay cool IMO. I have one of their shirts with the evil rabbit on it! |
|
|
|
Post by 2TDave on May 9, 2015 17:59:14 GMT -5
I have the same shirt! I love the rabbit...
I mean the logo:-/
|
|
|
|
Post by thatcrazyguy on May 9, 2015 18:08:06 GMT -5
Did you photoshop that or does it really say ScottTuning? Haha I need one of them as my name is Scott I started with 2 stickers. cut the "T" from one, and used it to cover the last "O" on another sticker. A little more trimming, and Scott Tuning is born! LoL! I hope the SCOOTERTUNING.CA guys have a sense of humor! The rabbit on the sticker is waay cool IMO. I have one of their shirts with the evil rabbit on it! Ill definately have to start ordering from them and wait a week or so for parts, and fuck partsforscooters.com which is less than 5miles away from me  |
|
|
|
Post by 2TDave on May 9, 2015 20:41:56 GMT -5
Oh how I wish partsforscooter would carry the same class of parts. They are my go to for stock type parts.
|
|
|
|
Post by niz76 on May 9, 2015 21:33:30 GMT -5
Oh how I wish partsforscooter would carry the same class of parts. They are my go to for stock type parts. Same Here. That would be a dream come true!! |
|
|
|
Post by oldgeek on May 9, 2015 22:07:20 GMT -5
Another through search of the cases and pipe assembly and I still have not found the piece of ring that it missing. I still cant decide whether to split the cases or just slap the new cylinder on. The stage 6 streetrace kit comes pretty much ready to bolt on if you want to. The ports are nicely beveled. Its very tempting to just slap it on and check the squish. Rain likely all day tomorrow again, so scooter stuff should happen.
|
|
|
|
Post by Elektrey on May 9, 2015 22:08:34 GMT -5
I have to say that my stage6 sport pro kit was also pretty well beveled I didn't have to anything to install it.
|
|
