|
|
Post by moofus02 on Mar 21, 2014 17:06:50 GMT -5
i purchased a dellorto clone for 35-45$ off of fleebay and it has performed perfect. Only took 10-12 days to get... Nice carbs Sent from my SPH-L720 using proboards |
|
|
|
Post by Sitticuss on Mar 21, 2014 18:27:36 GMT -5
I guess I should've done that. Now i'm left wondering if i'll get my $120 back. what size jets did you guys end up using for the pilot and main jet???
|
|
|
|
Post by Sitticuss on Mar 21, 2014 18:43:59 GMT -5
I ordered a 21mm from the link nelson provided. not sure where to get the choke nob or the elbow for the throttle cable. Do these carbs use the 5mm jet or the 6mm?
|
|
|
|
Post by moofus02 on Mar 21, 2014 18:52:04 GMT -5
I haven't installed mine yet but I got a clone 21mm phbg race off of Nelson and a real dellorto race 19mm phgb from one of the other guys here. Both are nice the dellorto being the nicer of the 2 but the difference is slight cosmetic as far as I can tell. Hard to beat 30 to 45 bucks for the clone
Sent from my SPH-L720 using proboards
|
|
|
|
Post by 90GTVert on Mar 21, 2014 18:54:04 GMT -5
|
|
|
|
Post by moofus02 on Mar 21, 2014 19:00:15 GMT -5
I ordered a 21mm from the link nelson provided. not sure where to get the choke nob or the elbow for the throttle cable. Do these carbs use the 5mm jet or the 6mm? 5mm I think. treatland.tv has all kinds of parts. You'll have to ask Nelson I think they come set up for a cable choke and you'll need a screw on adapter for the airbox. I think I've got a lever and pull nob choke. I'm going to use cable on my bikes. All the tuning and small parts are priced good from treatland.tv just they have so much it takes a while to find what you want on their sight Sent from my SPH-L720 using proboards |
|
|
|
Post by moofus02 on Mar 21, 2014 19:03:04 GMT -5
Got to love this sight Brent is posting links to parts faster than I can type lol
Sent from my SPH-L720 using proboards
|
|
|
|
Post by Sitticuss on Mar 24, 2014 3:09:44 GMT -5
Thanks for the links. So now i know who beat me to that carb....lol
|
|
|
|
Secret 90
Mar 24, 2014 11:37:26 GMT -5
via mobile
Post by nelson on Mar 24, 2014 11:37:26 GMT -5
I got a pull knob from treatland. The 19mm uses the smaller jets. I ran my 70 with the jet that came in it. Just changed the main.
|
|
|
|
Post by Sitticuss on Mar 25, 2014 0:57:19 GMT -5
|
|
|
|
Post by Sitticuss on Apr 14, 2014 16:27:09 GMT -5
worst and first scooter video
|
|
projec
Scoot Member
Posts: 52 
Location: Finland
|
Post by projec on May 14, 2014 13:56:13 GMT -5
uh why your wife should be mad at you if you offer a variator with your own money, uh
|
|
|
|
Post by 2TDave on May 14, 2014 14:05:35 GMT -5
Haha! Who's married and has his own money? Lol
|
|
|
|
Secret 90
Jun 1, 2014 0:13:22 GMT -5
via mobile
Post by nelson on Jun 1, 2014 0:13:22 GMT -5
Can u tell me if u are running the stock gears from the polaris? If so how does it pull off the line? I think I need to ditch my polaris gears
|
|
|
|
Post by Sitticuss on Jun 1, 2014 6:22:33 GMT -5
I'm running the stock gears. The main problem with mine was belt slippage on the variator off the line. It took a major resurfacing of the variator with 220 grit sandpaper and 8g rollers to bring it under control. I think Brent had the same problem and ended up using a Hoca variator. My 90cc wastes my 72cc build off the line
|
|
