|
|
Post by nelson on Mar 9, 2014 22:12:52 GMT -5
 I am fairly certain it is polini contesa. You can always add a better pipe later and fly! But like I said this was a scoot they brought back from hawaii and it was running untl the dude broke off the crank nut.  |
|
|
|
Post by nelson on Mar 9, 2014 22:16:22 GMT -5
Have to say I am a bit jealous that you are getting this kit  I at least want to know how it runs and a picture of it. U should be able to bolt this rght on. You will need a new base gasket u can cut yourself put some rtv thinly on both sides a ur good |
|
|
|
Post by 2stroked on Mar 10, 2014 7:28:46 GMT -5
We are not worthy, we are not wothy......lol! Man I swear I hope my scoot doesn't go into sticker shock and reject that high dollar kit..lol! Thank you nelson. Oh, and about the tenant, they are related to the punk with the supra, now if that isn't convieniant they vanished right after. I asked about their nephew. If I did not NEED the rent money I'd just burn that place to the ground and roast some marshmallows.lol Any way thank you guys so much.
|
|
|
|
Post by 2stroked on Mar 10, 2014 15:42:21 GMT -5
Well 90GTVert has shipped out the tuning rollers,clutch springs,contra springs, stickers and temp guage(?). Thank you sir for your generous donation. I will post when they arrive.
|
|
|
|
Post by 90GTVert on Mar 10, 2014 17:24:11 GMT -5
You're welcome. That's a little CHT gauge. It'll need the wires extended and you'll have to find a way to attach it to the plug or head. 2strokd, the one without the e, has used them before so if you run into trouble he'd prob be able to help.
|
|
|
|
Post by dan50 on Mar 10, 2014 17:42:48 GMT -5
I am so proud to be a member of 49ccScoot.com!  Not only have I learned so much from here and all the knowledge and experience that is shared, but to see everybody willing to help out a guy who's down really is a good feeling.  I don't have the money to lend a hand in 2stroked's build, but my thoughts and prayers go out to you and all who are helping.
I am really proud to display my 49ccScoot.com stickers on my helmet and scooter!
|
|
|
|
Post by 2stroked on Mar 10, 2014 18:21:03 GMT -5
I am so proud to be a member of 49ccScoot.com! Not only have I learned so much from here and all the knowledge and experience that is shared, but to see everybody willing to help out a guy who's down really is a good feeling. I don't have the money to lend a hand in 2stroked's build, but my thoughts and prayers go out to you and all who are helping.
I am really proud to display my 49ccScoot.com stickers on my helmet and scooter!
I too will proudly display the 49ccscoot.com logo on "my"(our) new scoot. Don't knock yourself dan50 prayers help more than people know. Thank you, Chris |
|
|
|
Post by 2stroked on Mar 10, 2014 18:26:50 GMT -5
If the pipe from190mech arrives before the bbk from nelson then I will just tune the cvt/carb for a base line run. If the bbk arrives first, I will go straight for the performance tune. Whatever happens I will post pics and info of each install. I will do ONE mod at a time and tune that mod before adding anything else. Thanks for everything y'all.
Chris
|
|
|
|
Post by 2stroked on Mar 11, 2014 7:13:12 GMT -5
Also I forgot to thank 2tdave for the carb/jets.190mech has shipped the exhaust as well. Thanks guys.
Chris
|
|
|
|
Post by 2TDave on Mar 11, 2014 7:27:18 GMT -5
Huh?
|
|
|
|
Post by 2TDave on Mar 11, 2014 7:34:21 GMT -5
I think you meant to thank Sitticus. I have the carb that needed a few parts. Lol
|
|
|
|
Post by nelson on Mar 11, 2014 8:31:37 GMT -5
i will have the bbk out today via UPS.
|
|
|
|
Post by usmcdoc on Mar 11, 2014 8:49:56 GMT -5
I think you meant to thank Sitticus. I have the carb that needed a few parts. Lol Chris..yeah man..pay attention..it was sitticus that said he had the same Carbs that I use and sell..that he would pass of your way..lol.. I know..it's like Christmas..when we were kids..we got so many gifts we couldn't remember who to thank..  Ya see this is what I like about this group vice 3 other forums I belonged to..folks help folks..vice bickering over who is wrong about a post..who has the fastest Scoot..who has the biggest male anatomy..whoever spends the most money on their build is the King etc.. So just compile it all and say thanks to 'All' in general..because this group of Scoot nuts is like an extension of your family..and nearly all of us have been in a position where you are. I started out with an old junk Geely chain driven scoot. Folks helped me find parts for that oddball 'lucky to hit 25mph' Scoot. Then I began a small business of parts/repairs for Scoots and helped as many as I could..that needed it..many times breaking even..if I was lucky. I have given away so much new stuff the past few years I lost track. So as I mentioned to ya in a message bro..when times get good for ya..pay it forward..for that is how we say Thank You...without uttering a word..  Yayiima benatigee |
|
|
|
Post by 2stroked on Mar 11, 2014 8:57:52 GMT -5
Uhhhh....... oh yeah.
Sorry about that. SITTICUSS THANK YOU FOR THE CARB/JETS. My brain melts under normal stress, but it is literaly running down my ear lobes. Guys I am having a hard time keeping my mind focused on any one thing right now. I don't want any one to get the idea that I am not equaly thankful to everyone who has helped. Each member who has donated will undoubtedly be rewarded by karma at least. If I can ever get my head above water, I will find a way to repay each donating member. Thank you, EVERYONE, your prayers and donations are most definatly appreciated. Thank you guys,
Chris
|
|
|
|
Post by 2stroked on Mar 11, 2014 9:13:22 GMT -5
I think you meant to thank Sitticus. I have the carb that needed a few parts. Lol Yeah, I'm a little burnt out, trying to get a renter, trying to get my car going, trying to fix my garage, trying to find my stuff.....ya know. Right now I am barely functioning above the level of a mentaly challenged rock. I just woke up this morning, and remembered my last post of last night, and it hit me that I forgot to thank SITTICUSS for the carb. For some reason as I was typing, I drew a blank and thanked the wrong person for the wrong thing. I have trouble with trying to keep the names of people in general straight in my mind. For that reason I will list the donor of each piece on my sig line when the scoot is finished. If it is allowes in the rules®s. THANK YOU EACH AND ALL Chris |
|
I at least want to know how it runs and a picture of it. U should be able to bolt this rght on. You will need a new base gasket u can cut yourself put some rtv thinly on both sides a ur good
Ya see this is what I like about this group vice 3 other forums I belonged to..folks help folks..vice bickering over who is wrong about a post..who has the fastest Scoot..who has the biggest male anatomy..whoever spends the most money on their build is the King etc.. So just compile it all and say thanks to 'All' in general..because this group of Scoot nuts is like an extension of your family..and nearly all of us have been in a position where you are. I started out with an old junk Geely chain driven scoot. Folks helped me find parts for that oddball 'lucky to hit 25mph' Scoot. Then I began a small business of parts/repairs for Scoots and helped as many as I could..that needed it..many times breaking even..if I was lucky. I have given away so much new stuff the past few years I lost track. So as I mentioned to ya in a message bro..when times get good for ya..pay it forward..for that is how we say Thank You...without uttering a word.. 