|
Post by 90GTVert on Mar 29, 2020 18:18:54 GMT -5
I pulled out behind a 'Busa in a 25MPH zone today. I rolled up behind him sputtering and playing with the throttle. Then he gently eased into the gas and socially distanced himself.
|
|
|
Post by pete130 on Mar 31, 2020 7:09:25 GMT -5
Nice snag. What year is it? LC or AC? Morini, Piaggio or Minarelli? It's a 2013 lol
|
|
|
Post by pete130 on Mar 31, 2020 7:18:00 GMT -5
Well I desided to get this for my new 2013 sr 50cc I was given lol was going to go the hole hog and do a 94cc or 84cc but it's so expencive when u have to buy there crank and pipe this kit i got on special sun is still €330 so not cheap but crank is €350 odd and pipe is over €600 so if i was going to do that I would just go a 2fast 101cc lol but this way no bottom end work or machining so think I'll just do the top end have a new 24mm mukini stage 6 race intake polini 9 rooler vairator a stage 6 full ajustable cluch lighten bell and 3 way polini rear pully so should go ok think I'll get about 20-22hp so I'll behappy with that still got the aerox 132cc stroke bb it's a hand grenade blobby thing if u go to race it's not the best on street and it has to run on race fuel so at $10L I wont be riding it a lot so I'm selling my bws 100cc dont need 3 scooters lol
|
|
|
Post by aeroxbud on Mar 31, 2020 12:39:06 GMT -5
Well I desided to get this for my new 2013 sr 50cc I was given lol was going to go the hole hog and do a 94cc or 84cc but it's so expencive when u have to buy there crank and pipe this kit i got on special sun is still €330 so not cheap but crank is €350 odd and pipe is over €600 so if i was going to do that I would just go a 2fast 101cc lol but this way no bottom end work or machining so think I'll just do the top end have a new 24mm mukini stage 6 race intake polini 9 rooler vairator a stage 6 full ajustable cluch lighten bell and 3 way polini rear pully so should go ok think I'll get about 20-22hp so I'll behappy with that still got the aerox 132cc stroke bb it's a hand grenade blobby thing if u go to race it's not the best on street and it has to run on race fuel so at $10L I wont be riding it a lot so I'm selling my bws 100cc dont need 3 scooters lol The 9 roller variator is so smooth in use. But a nightmare working out roller weights. In the end I went back to a 6 roller for ease.
|
|
|
Post by pinkscoot on Mar 31, 2020 16:33:54 GMT -5
Nice Pete, Mine is fuel injected so no carb tinkering. Let us know how it works out.
|
|
|
Post by pinkscoot on Mar 31, 2020 16:41:18 GMT -5
So yesterday I washed the GTS and took it for a ride to dry it. This body has so much bad touch up paint and dents and dings that is going to get a paint job in the future. I then changed the oil and transmission fluid. It didn't have may miles but it had been 2 years. I then took it for a social distance ride and explored roads I have never been on. This scoot cruises nicely a 6000 RPM doing 60MPH. At one point I realized I had no idea where I was but kept going until I saw a road I knew. I found my way home. I've lived here 15 years and realized I don't know much of the area beyond 5 miles of me.
Today I changed the tires on my neighbors Ruckus to boppers. It was the usual with to do. He took it for a ride and commented how much smoother it rolls. Then I got the Pink Scoot out and got it started and rode around downtown. It is a fun little scoot that has a good pucker factor.
|
|
|
Post by rehabkymco on Mar 31, 2020 21:29:02 GMT -5
Patched a hole in Becky's gearbox, gave her a new belt and 4 gram rollers.
|
|
|
|
Post by aeroxbud on Apr 1, 2020 18:56:43 GMT -5
Disconnected the solenoid for the Euro 4 emissions on the typhoon. Still painful slow. 😕 Washed the salt off the slider. Hopefully for the last time. Corrosion everywhere. Lots of work to do again.
|
|
|
Post by rehabkymco on Apr 1, 2020 19:22:54 GMT -5
Switched Becky up to 5 gram rollers
|
|
|
Post by Zino on Apr 1, 2020 20:05:07 GMT -5
Took the Zuma out for a first ride and some well needed Scooter Therapy had to run for a good 30 miles . Now I will get the 2 vinos ready to go for the weekend . My wife and I need to get out and ride together .
Felt good to just get back in the saddle and rev it up fly down the road and hear the pipe sing and gears spin .
|
|
|
Post by FrankenMech on Apr 1, 2020 21:19:56 GMT -5
After washing a scoot a leaf blower works real well to dry it off.
|
|
|
Post by MKDeuce on Apr 1, 2020 21:44:40 GMT -5
Installed my Bolt-On Side Stand from scootertuning.
|
|
|
Post by milly on Apr 2, 2020 13:57:26 GMT -5
|
|
|
Post by FrankenMech on Apr 2, 2020 21:34:50 GMT -5
Concrete blocks and scraps of wood make college/university student shelving. It has been a long time since college for me but I still have some...
|
|