|
Post by mrchilled85 on Jul 14, 2020 15:53:44 GMT -5
rebuild the bottom end of the stock Longjia LJ50QT-K engine with stage 6 bearings and reinforced oem style crankshaft and done the last of the changes in my loom on the Longjia LJ50QT-K to work with the malaguti f15 engine conversion so now running the digital ignition from the malaguti so now all lights and charging system is working and radiator is now mounted and pipes running under the floor
|
|
|
Post by milly on Jul 15, 2020 13:54:21 GMT -5
Finished the Yamaha Neos now for sale on internet.
|
|
|
Post by mrchilled85 on Jul 15, 2020 14:28:43 GMT -5
Finished the Yamaha Neos now for sale on internet. good luck with the sale mate
|
|
|
Post by aeroxbud on Jul 15, 2020 14:37:41 GMT -5
Finished the Yamaha Neos now for sale on internet. good luck with the sale mate Milly will do you a good deal. 😉
|
|
|
Post by mrchilled85 on Jul 15, 2020 15:10:43 GMT -5
|
|
|
Post by mrchilled85 on Jul 15, 2020 15:55:36 GMT -5
and no im not going to port this one to the moon as dont feel like rebuilding the bottom end again
|
|
|
Post by Zino on Jul 15, 2020 19:58:54 GMT -5
Would you do port maps of the stock one and your crazy 12k rpm version . Would give us tuners a range to work inside .
|
|
|
Post by mrchilled85 on Jul 15, 2020 23:47:45 GMT -5
Would you do port maps of the stock one and your crazy 12k rpm version . Would give us tuners a range to work inside . i have not been down to my friends yet to pickup my old engine still due to work mate as done 62hrs last week and all ready done 34hrs this monday
|
|
|
Post by milly on Jul 16, 2020 17:31:39 GMT -5
|
|
|
Post by milly on Jul 17, 2020 7:20:45 GMT -5
Bought the last bits for Violet in a while a 6mm and 7mm spanners Someone hopefully coming in the next half hour to buy Yamaha Neos.
|
|
|
Post by milly on Jul 17, 2020 9:26:20 GMT -5
Neos gone luckily we noticed a drawing pin in the tyre but bubbles came out and we reckon it had puncture sealer in it anyhow gave him a pump and knocked off some money so broke even and he rode it 40 miles home. Walked indoors wife said I know you sold bike but washing machine has just burnt out. In one hand and out the other lol
|
|
|
Post by aeroxbud on Jul 17, 2020 17:40:48 GMT -5
Them two strokes sell quickly. 😁
|
|
|
Post by pinkscoot on Jul 17, 2020 18:20:03 GMT -5
I finally assembled my hitch carrier. When I had the van it was easy to ramp into the back of it. The truck is a little high to get up into. Maybe I'll go visit Oldgeek and do some scooter distancing. His scoots are so fast that's how we roll, him way ahead of me. Here is a picture installed:
|
|
|
Post by FrankenMech on Jul 17, 2020 18:40:26 GMT -5
Can you get it to tilt so that you can load easier?
|
|
|
Post by pinkscoot on Jul 17, 2020 22:58:08 GMT -5
I wish., it probably wouldn't be hard. It does have a ramp that makes it pretty easy.
|
|