|
|
Post by pitobread on Nov 25, 2018 13:34:10 GMT -5
Rad Stuff (literally)
Also first start of the RC-One
|
|
|
|
Post by pitobread on Nov 19, 2018 15:01:00 GMT -5
I have been using a Rhode mic on the gopro. But the gopro is truly terrible in so many ways. I would record stuff just to get no audio for a bunch of important clips. Very frustrating.
Although I now have to remember to zoom and frame stuff.
|
|
|
|
Post by pitobread on Nov 19, 2018 11:24:14 GMT -5
Got a new camera so my shop doesn't look like a dungeon. (Even tthough it is)
|
|
|
|
Post by pitobread on Nov 19, 2018 0:39:30 GMT -5
Beautiful.
|
|
|
|
Post by pitobread on Nov 16, 2018 11:16:54 GMT -5
I think malossi make a non angled spark plug head for dio's. Or used to. Would need to be cut for over ore though
|
|
|
|
Post by pitobread on Nov 15, 2018 22:19:34 GMT -5
Here is another great video that shows some pipe building. It doesn't show much but gives some simple tricks to get good fits and what another guy does.
|
|
|
|
Post by pitobread on Nov 15, 2018 20:25:15 GMT -5
Make a wooden circle that has the bolt pattern of the head in it
Use a router bit with a corner rad with a bearing guide.
Voila.
|
|
|
|
Post by pitobread on Nov 15, 2018 20:14:55 GMT -5
Another great vid showing the labor intensive methods used to build a single expansion chamber!I used to tack up the whole pipe for proper fit till Wobbly at KiwiBiker commented that he works every joint with an internal ball mandrel and hammer,from each end of the pipe to get a perfect fit,leaving only the final belly seam for the last weld..That way all the seams are hammered smooth and round for each weld,smart man!!I copied his method and it does work well,takes longer,but building a pipe already uses waay too many hours..Thanks for taking the time making these vids to show others the way!!  Yep. I use those mandrels to make the inside truly seamless (or a close proximity  ) I welded each section individually as well, and if I had not made the cardboard template exhaust I would have definitely tacked it, then broke it apart for final weld. |
|
|
|
Post by pitobread on Nov 15, 2018 9:34:46 GMT -5
I will probably try to build a silencer. I have these desiccant tubes off a giant compressor that are the right shape.
|
|
|
|
Post by pitobread on Nov 14, 2018 22:29:40 GMT -5
 Oh boy. |
|
|
|
Post by pitobread on Nov 11, 2018 22:15:15 GMT -5
AntiGravity battery. Get the 8 cell, you can get it on amazon its like the size of a regular scooter battery, but you can start a car with it. It is a lithium cell battery tho. amzn.to/2DxvQ3xNext choice would be an Odyssey AGM battery, pretty small, don't know which model you would want. I have used a few of these over the years in a few cars and they are a nice product. |
|
|
|
Post by pitobread on Nov 5, 2018 19:19:19 GMT -5
I start it up at the end.
|
|
|
|
Post by pitobread on Nov 5, 2018 15:32:43 GMT -5
Peugeot Speedfight is close but not a direct fit.
No real bolt on solutions.
|
|
|
|
Post by pitobread on Nov 5, 2018 9:48:21 GMT -5
Yep, played around with the spreadsheet, you are correct John. It is just a coincidence that the blue line shows up at half the piston diameter.. when I change that value it doesn't go away.
I will update the video with that info
|
|
|
|
Post by pitobread on Nov 5, 2018 0:12:50 GMT -5
Im on it, just got a little bit of footage to chew through
|
|
)