|
Post by magoconnor on Sept 20, 2019 19:40:28 GMT -5
Hello.
What's y'all experience with adding a windshield in terms of top speed? Some say that it slows down the bike, While others have reported that it added an extra 2-3mph Is it worth getting one?
Cheers Mag.
|
|
|
Post by magoconnor on Sept 20, 2019 17:20:27 GMT -5
Hello. I bought headlamp off ebay, the bulb is blown. No tag or model name on the bulb. Can anybody help me out?
|
|
|
Post by magoconnor on Sept 17, 2019 20:22:11 GMT -5
How long do I have to wait before firing up the engine? Im appliyng a small amount of rtv.
|
|
|
Post by magoconnor on Sept 17, 2019 0:24:52 GMT -5
Or should I use another type of grease, like lithium? or is engine oil better?
|
|
|
Post by magoconnor on Sept 16, 2019 16:19:34 GMT -5
Hello Thanks you guys for chipping in I really do appreciate it.
I have applied some metal polish.
I do have some grease I use to lube up the rear clutch pulley. I believe its made by malossi, some moly-type grease.
Will this work?
|
|
|
Post by magoconnor on Sept 16, 2019 10:21:31 GMT -5
Okay, I do have some auto sol laying around will this work?
If its only the dust seal, will it have any effect on it leaking?
|
|
|
Post by magoconnor on Sept 15, 2019 23:57:44 GMT -5
anyone?
|
|
|
Post by magoconnor on Sept 15, 2019 16:28:10 GMT -5
Hello. I've accidentally made a few marks in the crankshaft when trying to remove the oil seal. After I removed the seal, I spotted the damage. I've tried gentle, to sand with some 400 grit and then some 1000 grit sandpaper. I dont know if its enough or if its unfixable, and a new crankshaft is the only way out. The oil seal has a double lip, the nicks only goes as far as the outer lip on the seal. Tell what you think.
|
|
|
Post by magoconnor on Sept 11, 2019 9:57:52 GMT -5
I dont really think much thought has been giving to the airflow. But here jugde for yourself: sprzedajemy.pl/filtr-motoforce-airbox-peugeot-yamaha-inne-wolka-kanska-2-6bea9f-nr54119222Not my pictures.. But on the fith picture, you can clearly see that its just two pvc pipes plug with foam, and the carb is being fed directly from that. Ño twist or turns to promote back pressure. The reduced intake noise probaly just comes from the soft plastic housing, absorbing alot of the unwanted sound. Also There is a fine line between dialing the carb down, and the airbox simply not delivering enough air, for optimal engine performance. Adding a few extra intakes would not hurt any air flow.
|
|
|
Post by magoconnor on Sept 10, 2019 11:24:06 GMT -5
If you need any more pictures, please let me know.
|
|
|
Post by magoconnor on Sept 10, 2019 0:26:20 GMT -5
|
|
|
Post by magoconnor on Sept 10, 2019 0:24:32 GMT -5
Hello. I swapped out my crank some time ago, and by so doing I also changed the crank seals. The other day I was in the middle of of changing roller weights, when I spotted the seal. The seal was given a small amount of rtv, and lubed in the center. I have only driven about 650 miles with this seal installed. There is no leak as of yet, so there may be no need to change it. And I dont know if its been crooked for the whole 650 miles, or if it has moved recently. There is some baad weather coimg in, so now is the time to fix it, if ita neceassary. Its not crooked by much maybe only 1mm or 2mm. And again not leaking. tell me what you think.
|
|
|
Post by magoconnor on Sept 9, 2019 22:39:10 GMT -5
Okay, what would be the best way to go about it? Without a special tool.
|
|
|
Post by magoconnor on Sept 9, 2019 10:36:01 GMT -5
|
|
|
Post by magoconnor on Sept 9, 2019 10:13:57 GMT -5
Do you know if its possible to change the seal with the oil still in the bike?
|
|