|
Post by magoconnor on Mar 5, 2020 15:35:25 GMT -5
Cool ;D Do you know what the standard gear ratio is on a kymco agility with 12 " ?
|
|
|
Post by magoconnor on Mar 5, 2020 0:33:21 GMT -5
Hello. Can anybody help me find a set of 8% or 10% taller gear set for a kymco agility with 12" tires (139qmb). Only good quality tho Cheers Mag.
|
|
|
Post by magoconnor on Mar 1, 2020 19:58:46 GMT -5
Hello.
Im currently not able to mount a speedo on my bike, execpt for a gps but well I dont have a spare one. I read someone on this forum talking about changing the oil by the hours instead of keeping track of the miles driven.
My question is how many hours does it roughly take, to drive 600 miles? Or how many hours driven between oil change?
|
|
|
Post by magoconnor on Mar 1, 2020 19:57:23 GMT -5
Okay thanks bud I think I posted this the wrong place by mistake.
|
|
|
Post by magoconnor on Mar 1, 2020 12:25:30 GMT -5
Hello.
Im currently not able to mount a speedo on my bike, execpt for a gps but well I dont have a spare one. I read someone on this forum talking about changing the oil by the hours instead of keeping track of the miles driven.
My question is how many hours does it roughly take, to drive 600 miles? Or how many hours driven between oil change?
|
|
|
Post by magoconnor on Feb 26, 2020 22:04:39 GMT -5
Super, what wire gauge would you use, from cdi to coil ?
|
|
|
Post by magoconnor on Feb 26, 2020 16:05:45 GMT -5
Hello again.
I have a fun question, Im hoping some of you can answear.
I have a wiring system where the cdi sits right up front, just behind the headlight and the coil is mounted not far from engine.
which means that I have to run a long wire from cdi to the coil.
Would there be any benefit in moving the cdi box closer to the coil?
|
|
|
Post by magoconnor on Feb 24, 2020 16:37:24 GMT -5
Hello again.
I have a fun question, Im hoping some of you can answear.
I have a metruck styled wiring system, where the cdi sits right up front, just behind the headlight and the coil is mounted not far from engine. which means that I have to run a long wire from cdi to the coil.
Would there be any benefit in moving the cdi box closer to the coil?
|
|
|
Post by magoconnor on Feb 23, 2020 18:54:27 GMT -5
Yeah it might be the best way to go about it Is there a fuel filter you would recommend?
|
|
|
Post by magoconnor on Feb 23, 2020 14:41:33 GMT -5
Hello.
Anybody got some tips on how to get these things back to new like clean?
|
|
|
Post by magoconnor on Feb 7, 2020 18:37:51 GMT -5
Hello. So here is my problem, I got a triple tree which is made for 33mm fork legs, but I got a pair of 31mm fork legs that fits my new brake caliper.
Will it be possible to shim it down from 33mm to 31mm, or will this be unsafe?
If so, I need a 1mm round shim. A soda can is 0.25mm thick, so I will need 4 strips to make it work. Probably not the best way to go about it... Any good ideas what els I can use to make set of shims?
|
|
|
Post by magoconnor on Jan 23, 2020 21:37:40 GMT -5
Sounds like a good option, I maybe like the look of this a little more : ruckhouse.com/en/styling-parts-handlebar-stems/370189-handlebar-stem-ruckhouse-chrome-honda-ruckus.htmlBut it may be harder to get it to work. I have contacted the seller, and they have informed me that its inner diameter is 24mm The only problem would then be to mount it securely. It has a 21mm screw hole that allows it to be mounted with a screw through the steering shaft, so no claming. The screw hole sits about 1 cm from the top of the steering shaft, so I would have to drill hole in the shaft for it to mounted There is already a hold in the steering shaft, for when the original handlebars where mounted. But it sits about 5-6 cm from the top of the shaft, maybe it could be filled out with a bit of welding. But what do you guys think?
|
|
|
Post by magoconnor on Jan 23, 2020 17:12:43 GMT -5
Do you know if you can get a straight bmx clamp? Because I do not have room for the bars to hang over the front fairing.
|
|
|
Post by magoconnor on Jan 23, 2020 16:07:20 GMT -5
Hello. Im looking for a handlebar stem that will fit a kymco super 8. The steering shaft is 24,2mm, maybe a honda zoomer / ruckus stem will fit? Im not a 100% sure, what the diameter is on a honda ruckus/zoomer. Maybe some of you guys can confirm that for me.
But if you happen to know of a stem that will fit a 24,2mm shaft, please let me know ;D
|
|
|
Post by magoconnor on Jan 21, 2020 10:44:22 GMT -5
Hello, does anybody know where I can find a handlebar stem that will fit a 24,2mm steering shaft? The handlebars are 22mm. If you do, please put up a link it would really help me out.
|
|