|
Post by iwiketuddlz on Oct 6, 2014 8:20:32 GMT -5
It does run good I guess top sp d is 52mph, I just need a new crank ,man the 12mm is hard to come by,I can't find too many of them ,any ideas?
|
|
|
Post by iwiketuddlz on Oct 6, 2014 8:22:50 GMT -5
I definitely want a full circle possible a stroker if I can find one.
|
|
|
Post by 2TDave on Oct 6, 2014 8:49:32 GMT -5
Stage6 has a hpc large spline with 12mm pin. 12mm is easy it's the large spline stuff in 39 mm stroke that's less common.
|
|
|
Post by iwiketuddlz on Oct 6, 2014 14:09:31 GMT -5
Awesome where can I buy it? And will a 90cc crank work in my case?
|
|
|
Post by 2TDave on Oct 6, 2014 16:40:39 GMT -5
Scootertuning.ca has them in the Vento section. No 90cc crank without cutting the cases and you'd need a new cylinder. Hoca makes a 41.4 stroker crank I think it is for the 70cc kits. Not sure if it's large spline. You would need to space the cylinder up most likely.
|
|
|
Post by iwiketuddlz on Oct 6, 2014 16:48:52 GMT -5
OK thanks yea I will most likely buy a new cylinder I have ruined this one somehow it had a few nail grabers ,not sure how they got there I have been running rich ,but it is what it is I guess, I have lost all my power ,man it was a beast 500miles ago lol ,I'm bout to check compression again I haven't checked it sence I felt the nail grabers in the cylinder
|
|
|
Post by iwiketuddlz on Oct 6, 2014 20:21:23 GMT -5
I just bought the Doppler endurance crank ,can't beat it for the money ,and I got my power back by changing my rollers to 4gram
|
|
|
Post by iwiketuddlz on Oct 7, 2014 9:05:21 GMT -5
I'm going to need seals now,any ideas? Affordable seals for deals?
|
|
|
Post by iwiketuddlz on Oct 7, 2014 9:08:35 GMT -5
Woo cant wait for my crank,I sure hope there shipping is faster than racing planet,been a month with them still no gears...sigh
|
|
|
Post by 2TDave on Oct 7, 2014 9:21:34 GMT -5
Who did you order from?
|
|
|
Post by iwiketuddlz on Oct 7, 2014 11:36:53 GMT -5
The place you recomend ,scootertunning
|
|
|
Post by 2TDave on Oct 7, 2014 13:14:40 GMT -5
They don't list a Doppler with large spline and 12mm pin. Do you have a 10mm pin?
|
|
|
Post by 2TDave on Oct 7, 2014 13:17:18 GMT -5
If you ordered the one featured on their home page it's for a Zuma. Small taper, small spline. My RX8/Triton is Large taper, large spline.
|
|
|
Post by iwiketuddlz on Oct 7, 2014 15:58:37 GMT -5
The one I orders d said large 12mm i hope its correct ,cause they shipped it today woot should be here in a few day.
|
|
|
Post by iwiketuddlz on Oct 7, 2014 16:06:25 GMT -5
I went and checked and it says 12mm piston pin,that is right right? Mine is the large stuff dang I hope its right dangit,now I'm worrie d sigh
|
|