|
Post by vlatx on May 29, 2017 10:41:23 GMT -5
|
|
|
Post by vlatx on May 28, 2017 14:25:32 GMT -5
Are you planing to do CVT upgrade,i have a friend ho has Tmax 500 and after the upgrade of a vario from a Malossi the scoot got a looooot more acceleration,the max speed is the same.
|
|
|
Post by vlatx on May 28, 2017 13:57:58 GMT -5
|
|
|
Post by vlatx on Jun 2, 2016 16:45:32 GMT -5
Be careful with that meteor piston,they have bad reputation of seazing during the brake-in.
|
|
|
Post by vlatx on May 24, 2016 16:12:18 GMT -5
The ehaust port on the china bbk is hight 22/21mm and need very good combo for sqush/compresion so you can make speed and power,also aim the roller weight so you can have 8500 to 9500 powerband,heavy rollers and pipe dont match,you have to take the cvt where the powerband on the BBK and pipe (8500 until 10.000)
|
|
|
Post by vlatx on May 23, 2016 18:53:15 GMT -5
22mm exhaust port,sport pipe like the giannelli reverse and a tuned up carb and cvt i was hiting pik power at 9.000 and rev freely until 10.500
|
|
|
Post by vlatx on May 19, 2016 16:53:03 GMT -5
7.500 ? dont ask top speed from that kind of RPM
|
|
|
Post by vlatx on May 18, 2016 11:34:25 GMT -5
Flat slide carb is a go,and 28mm i think it will be ok,dont go over 20mm Ф on the pipe,and try to make adapter so you can alter the ignition.
|
|
|
Post by vlatx on May 17, 2016 11:40:05 GMT -5
Nice one,what carb are you going to run on it,and pipe?
|
|
|
Post by vlatx on May 17, 2016 11:37:53 GMT -5
Replace the vario,it is the biggest restrictor on the bike,put koso/malossi or polini vario for more belt travel an more v-max
|
|
|
Post by vlatx on Oct 23, 2015 14:56:10 GMT -5
There is a plate under the seat from the right side,also from the right side over the transmition oil plug.
|
|
|
Post by vlatx on Oct 23, 2015 10:52:31 GMT -5
Nice one,i have a tomos a3 and i want to do somthing simular with 40qmb engine,front forks and rim from a baotian scooter.something like this
|
|
|
Post by vlatx on Oct 19, 2015 16:09:41 GMT -5
Some video,this is not the top speed
|
|
|
Post by vlatx on Oct 18, 2015 12:13:46 GMT -5
just the grooves,but im planing to buy Top performance pully with race grooves.
|
|
|
Post by vlatx on Oct 17, 2015 19:15:36 GMT -5
Ok look,the belt must bee under 17mm because the rear torq driver is copy of the minarelli and it is designed to work with 16mm belts so you can use 792x16,6 belt for more travel,and i have also modified the torq driver so it open a bit more and lets the belt to go deaper in high gear.
|
|