|
Post by vlatx on Apr 22, 2021 8:47:59 GMT -5
Ok thanks guys,il go with Stage 6 sport pro mk2 next time i do a rebuild.
|
|
|
Post by vlatx on Apr 21, 2021 13:25:12 GMT -5
Hi guys,i want to do a conversion from 50cc to 100cc on 1E40QMB engine cases.Can it be done with crank and cylinder kit from BWS100 4VP engine, can i use the oem 16mm variator and ignition system.I know that i have to bore the cases.
|
|
|
Post by vlatx on Nov 1, 2018 16:26:31 GMT -5
You can machine the head to enter inside the cilinder for beeter sqush,and put a O ring groove for sealing too.
|
|
|
Post by vlatx on Oct 26, 2018 11:52:15 GMT -5
nice work!
|
|
|
Post by vlatx on Oct 23, 2018 17:15:21 GMT -5
I allredy have a strong HPC crank in it but only 39.3mm of stroke,the offer of stroker cranks in my contry are none.so im stuck olny with 47mm kits
|
|
|
Post by vlatx on Oct 23, 2018 9:48:56 GMT -5
Hi guys,can you put the 50mm JOG cylinder kit on a stock 40qmb engine,using a spacer and cuting down the cylinder from above to make proper compresion or you must use the stroker crank for it?
|
|
|
Post by vlatx on Sept 10, 2018 10:28:29 GMT -5
Wery simular to the Top Nardo Replica,nice pipe for mid sport kits like Corsa.
|
|
|
Post by vlatx on Apr 12, 2018 18:07:49 GMT -5
BR8HS or even BR9HS in warmer weather is a must for that kit.
|
|
|
Post by vlatx on Feb 28, 2018 14:40:54 GMT -5
the intake spacer would be a separate peace?
|
|
|
Post by vlatx on Jan 27, 2018 7:39:35 GMT -5
PETG can stand up to 90c degrees and i thing it can be posible to run it like that.
|
|
|
Post by vlatx on Jan 12, 2018 5:57:16 GMT -5
17.5 is a no goo on a stage 6 racing cylinder,you want something in the 21mm or + range.
|
|
|
Post by vlatx on Dec 27, 2017 19:33:33 GMT -5
is there a space for making an rotodisk intake on the honda block
|
|
|
Post by vlatx on Dec 24, 2017 8:53:49 GMT -5
check the sqush and if you have space and does not change the compresion ratio too much cut the cylinder from the botom.
|
|
|
Post by vlatx on Dec 22, 2017 9:16:56 GMT -5
It is a 61% wide but and 200*,you have 20HP and 190PSI presure on 10.500RPM at 1.5mm piston TDC
|
|
|
Post by vlatx on Dec 10, 2017 14:30:27 GMT -5
Those are Athena Racing kits,great quality and great power
|
|