|
Post by 180°off on Jun 16, 2017 13:28:59 GMT -5
I did have starter connected but key was not in ignition. Also I didn't hear the starter engage. It was very weird! No dead animals by the house and knowone around to play tricks. Maybe somehow I tripped the starter at the selinoid? But I'm almost 100% positive I did not. Very weird!
|
|
|
Post by 180°off on Jun 16, 2017 8:16:50 GMT -5
so I'm putting the cylinder back on my scoot, I graphics the piston and start shimming the cylinder back over the piston. all of a sudden the crank turns rapidly smashing my fingers? WTF? A LITTLE BLOOD IS OK! Now I make sure belt is loose and tie down the flywheel with some speaker wire. It does it again?? This Time Snag My Skin On The Frame And put another hole in my skin! Never had this happen? Why is it doing this? It's like it's spring loaded. That or some spirit is pissed off at me!
|
|
|
Post by 180°off on Jun 16, 2017 3:10:23 GMT -5
I saw them at banggood. searched around and they were the cheapest there also. I think 79.99
|
|
|
Post by 180°off on Jun 16, 2017 0:50:34 GMT -5
|
|
|
Post by 180°off on Jun 14, 2017 13:01:16 GMT -5
|
|
|
Post by 180°off on Jun 9, 2017 20:10:37 GMT -5
found out why my scoot won't start! I think a compression of 80psi will do it! Dang it!!!! Anybody got a gasket kit lying around for a 150 gy6??
|
|
|
Post by 180°off on Jun 5, 2017 22:44:37 GMT -5
Stripped the spark plug threads on the head of my "new scoot"! Having problems with the 3 carbs I have not getting fuel to the engine. Imy thinking I am not adjusting the floats correctly. And I saw oil leaking from behind the flywheel! Maybe I paid to much for this damn thing!
|
|
|
Post by 180°off on Jun 5, 2017 13:38:13 GMT -5
I bring mine inside. After having 4 stolen from me!
|
|
|
Post by 180°off on Jun 1, 2017 1:57:16 GMT -5
So I'm on this website buyitmao.com and I came across a Yama ha aero that you can buy and have shipped to your door for around $4500 bucks. Not to bad I guess since it's shipping from china. And the shipping charge really isn't that expensive! Just wish I had the cash.
|
|
|
Post by 180°off on May 31, 2017 17:37:26 GMT -5
Are the carbs with the diaphragm that look like a T almost, better than the carbs with a round diaphragm? And is the mikuni carb better than the khein carb?
|
|
|
Post by 180°off on May 26, 2017 20:05:12 GMT -5
Thanks for all the help!
|
|
|
Post by 180°off on May 24, 2017 0:47:16 GMT -5
|
|
|
Post by 180°off on May 21, 2017 18:58:34 GMT -5
Yeah, I think it is a burnt up valve. Know matter what I do it won't run right. Anybody got an extra 150cc head? Preferably with the bigger valves??
|
|
|
Post by 180°off on May 13, 2017 13:45:30 GMT -5
Wished I had money to fix mine!
|
|
|
Post by 180°off on May 9, 2017 14:01:51 GMT -5
Finally got my 150 running. Now I'm having major issues. I have 4 carbs, and 4 different spark plugs. Now all are doing the same thing and turning the spark plug black with carbon on it. If I upjet it's wet and fowls plugs. I used a 85 88 96 105 108 110 112 114 jet all give carbon black, and shoots out black smoke from exhaust. Now the air fuel mixture screw is in all the way. Even on the 85 jet. I have no air filter and running a bigger valve head. I don't know what to do? I'm stumped!
|
|