|
Post by niz76 on Oct 27, 2014 12:41:43 GMT -5
I think this may be my best find yet! I was going to put my usual screenshot of the CL ad, but the seller already deleted it. It was a short text-only ad with no pics. Something like this: "For Sale 2 stroke E-Ton scooter. Doesn't run currently but did a few months ago when I put it away in the garage. Has always been professionally serviced. We just don't ride it anymore. I think there's something wrong with the carburetor. $250. Hoping to sell today" The ad was only up for 1 hour when I called. When I got to the neighborhood it was a very nice upper-class gated community. I tried not to show my excitement when I realized this scoot is in amazing shape and has a Technigas (not sure which model- looks exactly like the one Jhobe just got) exhaust on it! I asked if he'd take $200 but he said $250 was bottom dollar. I used the info from the shows like "Fast and loud" and "Counting Cars" etc. and said I'd meet him in the middle at $225 and he begrudgingly agreed lol. I knew those shows were educational! I think it also might have been since it was 7pm and we were getting eaten alive by mosquitos! The seller said the scoot would do 50mph with him on it with the "fancy exhaust" and he was 300lbs.+! I can't wait to get this lil ripper running! Here it is: Haha J/K J/K! (This was a friend of a friends scoot I met this weekend) HERE it is: The exit plan here is the same as usual: Get it running and sell it! lol I think I may just keep the exhaust for myself and put a stocker on it. Probably ask $600 on this one... The only problem: this is basically the exact build I've been wanting! A small frame, lightweight 90cc wheelie machine! I'm already attached d@mn!
|
|
|
Post by blackfurypt on Oct 27, 2014 12:53:55 GMT -5
Nice A 2T on steroids
|
|
|
Post by niz76 on Oct 27, 2014 13:10:44 GMT -5
Dang. Looks like the same problem I had with the 4t; rust in the fuel tank.
|
|
|
Post by blackfurypt on Oct 27, 2014 13:53:11 GMT -5
The fuel tank in here are plastic... In there is metal?
|
|
|
Post by moofus02 on Oct 27, 2014 13:55:25 GMT -5
I think this may be my best find yet! I was going to put my usual screenshot of the CL ad, but the seller already deleted it. It was a short text-only ad with no pics. Something like this: "For Sale 2 stroke E-Ton scooter. Doesn't run currently but did a few months ago when I put it away in the garage. Has always been professionally serviced. We just don't ride it anymore. I think there's something wrong with the carburetor. $250. Hoping to sell today" The ad was only up for 1 hour when I called. When I got to the neighborhood it was a very nice upper-class gated community. I tried not to show my excitement when I realized this scoot is in amazing shape and has a Technigas (not sure which model- looks exactly like the one Jhobe just got) exhaust on it! I asked if he'd take $200 but he said $250 was bottom dollar. I used the info from the shows like "Fast and loud" and "Counting Cars" etc. and said I'd meet him in the middle at $225 and he begrudgingly agreed lol. I knew those shows were educational! I think it also might have been since it was 7pm and we were getting eaten alive by mosquitos! The seller said the scoot would do 50mph with him on it with the "fancy exhaust" and he was 300lbs.+! I can't wait to get this lil ripper running! Here it is: Haha J/K J/K! (This was a friend of a friends scoot I met this weekend) HERE it is: The exit plan here is the same as usual: Get it running and sell it! lol I think I may just keep the exhaust for myself and put a stocker on it. Probably ask $600 on this one... The only problem: this is basically the exact build I've been wanting! A small frame, lightweight 90cc wheelie machine! I'm already attached d@mn! Nice but i wouldn't call it small frame uses longcase 1e40qmb like triton just has deeper gears. Make sure the green wire on back of cdi is cut so it revs Sent from my SPH-L720 using proboards
|
|
|
Post by niz76 on Oct 27, 2014 14:04:15 GMT -5
Ya you're right- it isn't really that small of frame once digging into it. It's got 10" rims but fat tires on a longcase.
|
|
|
Post by niz76 on Oct 27, 2014 14:05:06 GMT -5
The fuel tank in here are plastic... In there is metal? The Vento Zip I flipped had a plastic tank but all the other scoots have had metal.
|
|
|
Post by niz76 on Oct 27, 2014 14:06:34 GMT -5
Uh-oh- looks like someone capped off the oil pump and converted to pre-mix, however when I drained the fuel I didn't signs of oil... hope the compression is good...
|
|
|
Post by moofus02 on Oct 27, 2014 14:50:54 GMT -5
They will take a 12 inch triton wheel
Sent from my SPH-L720 using proboards
|
|
|
Post by 90GTVert on Oct 27, 2014 15:00:23 GMT -5
How long before you quit and become a used scooter dealership? I wanna see the local TV ad when you're in a cowboy hat with clown shoes on saying something cheesy like, "No Nizscuses, just quality Nizscooters".
|
|
|
Post by 2TDave on Oct 27, 2014 15:12:47 GMT -5
I've got spare 50cc cylinders and a set new rings that came with a motor if you need Niz.
|
|
|
Post by niz76 on Oct 27, 2014 15:46:16 GMT -5
How long before you quit and become a used scooter dealership? I wanna see the local TV ad when you're in a cowboy hat with clown shoes on saying something cheesy like, "No Nizscuses, just quality Nizscooters". Lol I love the cheezyness! Can I have your permission to use that in the TV ad? lol
|
|
|
Post by niz76 on Oct 27, 2014 15:47:58 GMT -5
I've got spare 50cc cylinders and a set new rings that came with a motor if you need Niz. Sweet! I've got a good looking cylinder that just needs the exhaust manifold mount re-threaded but no more good rings. I may come a callin'!
|
|
|
Post by Elektrey on Oct 27, 2014 17:03:19 GMT -5
thats nice. 10" wheels but looks like the tires make up for it. Probably total diameter of a 11-13" wheel.
|
|
|
Post by niz76 on Oct 27, 2014 18:25:12 GMT -5
Really digging into her now... I cleaned the gas tank with 1:1 muriatic acid and water, rinsed it, dried it etc. The carb was in equally bad shape: Got the carb all cleaned out and put a 75 mj in. I was thinking I'd like an 80 to start with this exhaust but I don't have one- next step up i have is an 85. This Beamer must be a church- goin' girl cause she aint givin' it up easy. The cylinder isn't even supplying enough vaccum to open the petcock and this is what I was concerned about when I saw the oil pump was bypassed but no trace of oil in the fuel...
|
|