|
|
Post by Lucass2T on Nov 11, 2015 5:38:37 GMT -5
awesome video! Man that seems so much fun with all those ppl on fast little scoots! Nice roads too! Blastin' around overtaking cars and stuff! |
|
|
|
Post by 90GTVert on Nov 11, 2015 6:08:41 GMT -5
Great vid! You guys in HI have so many fast scoots around. Seems much different than the scooter scene in the rest of the states.
|
|
|
|
Post by spaz12 on Nov 11, 2015 13:46:54 GMT -5
Really nice video man! I love it. I recognized a lot of the places that you guys were riding, which brought back a lot of good memories  So, yeah, thanks for sharing the video! |
|
|
|
Post by mauibird on Nov 30, 2015 21:38:05 GMT -5
Got the time and the nerve today to get out those bushing sleeves for the motor mount. I welded a washer inside the sleeve. I held the ears in a vice, and smashed the s**t out of it several times until it came out.   |
|
|
|
Post by mauibird on Nov 30, 2015 21:38:27 GMT -5
score one for me!
|
|
|
|
Post by mauibird on Nov 30, 2015 21:38:48 GMT -5
My boogerwelds held up.   One more… here we go… |
|
|
|
Post by mauibird on Nov 30, 2015 21:45:20 GMT -5
Score one for the bushing sleeve.  |
|
|
|
Post by mauibird on Nov 30, 2015 21:48:57 GMT -5
Getting a good grip/support on the ear was a lot harder on the long side. Again, I had to smash the s**t out of it several times, and it came out.   |
|
|
|
Post by mauibird on Nov 30, 2015 21:51:57 GMT -5
I had a spare transmission bearing so i tapped it in with some oil and a large socket  |
|
|
|
Post by mauibird on Nov 30, 2015 21:57:30 GMT -5
|
|
|
|
Post by Lucass2T on Dec 1, 2015 9:25:07 GMT -5
You could have just heated the case halves to about 230-240F and tap those bearings out with a 1/2" ratchet extender  Oh wait...i think i spoke before i looked hehe. You had some sort of PU bushing in there? |
|
|
|
Post by mauibird on Dec 1, 2015 15:34:00 GMT -5
You could have just heated the case halves to about 230-240F and tap those bearings out with a 1/2" ratchet extender Oh wait...i think i spoke before i looked hehe. You had some sort of PU bushing in there? They were rubber bushings. I cut the rubber out, but was struggling with the metal sleeve. I tried several methods before coming to this one. They're out now and the build can continue. |
|
|
|
Post by niz76 on Dec 1, 2015 20:00:36 GMT -5
I just watched the video and man, that's awesome! I love the carb slide camera angle! mesmerizing. lol. Is that a PWK 28 flat slide?
Man, this really gets me wanting to try to organize some kinda scoot run here in Tampa...
|
|
|
|
Post by mauibird on Dec 2, 2015 5:11:23 GMT -5
I just watched the video and man, that's awesome! I love the carb slide camera angle! mesmerizing. lol. Is that a PWK 28 flat slide? Man, this really gets me wanting to try to organize some kinda scoot run here in Tampa… It is the OKO 28mm carb. I think they call it round slide, but the intake side is flat, and the engine side is rounded. Thanks for the comments! |
|
|
|
Post by mauibird on Dec 7, 2015 16:25:48 GMT -5
Getting closer. Tapped in the motor mount bearings.   |
|
So, yeah, thanks for sharing the video! 
