|
|
Post by sai on Jul 17, 2015 14:36:21 GMT -5
You mentioned the Athena. Everything else they make is damn good, so I'm sure the crank is just as good.       i hope these are good enough for you to identify? I don't have photos of the super 9 of course |
|
|
|
Post by spaz12 on Jul 17, 2015 14:43:09 GMT -5
Take more pictures around the carburetor and intake area please. I need to see where the carb mounts to the engine.
|
|
|
|
Post by spaz12 on Jul 17, 2015 14:45:22 GMT -5
It looks like it might be a Mina clone, but I'm not sure yet.
|
|
|
|
Post by sai on Jul 17, 2015 14:55:56 GMT -5
Take more pictures around the carburetor and intake area please. I need to see where the carb mounts to the engine.   here you go. Have you seen the malossi part? If not here it is. M3111667 I Was told that both super 8ac and super 9lc use horizontal engine. |
|
|
|
Post by spaz12 on Jul 17, 2015 15:02:07 GMT -5
That's a horizontal motor for sure. But the way the intake is on there, it has me second guessing myself.
Start a new thread. Something like ...IDENTIFY THIS MOTOR PLEASE.
I'm not sure so I think more people should look.
And yeah, that was the Malossi part number I found last night.
|
|
|
|
Post by sai on Jul 17, 2015 15:07:20 GMT -5
That's a horizontal motor for sure. But the way the intake is on there, it has me second guessing myself. Start a new thread. Something like ...IDENTIFY THIS MOTOR PLEASE. I'm not sure so I think more people should look. And yeah, that was the Malossi part number I found last night. Based on your best guess, you what do you think it is and is that scooter guide website wrong? |
|
|
|
Post by spaz12 on Jul 17, 2015 15:22:18 GMT -5
Well, it looks like a Minarelli design. I don't have much experience with the Mina clone motors though. But from the pictures that I saw of the Honda motor, I know it's not that.
There is still the Morini style motor and I have zero experience with those or what they look like. So, it's possible to be a Morini motor...??
|
|
|
|
Post by spaz12 on Jul 17, 2015 15:25:56 GMT -5
If it is a Minarelli style motor, then you'll have a lot of options for upgrades. You won't be limited to that one Malossi top end.
But you must KNOW first.
|
|
|
|
Post by sai on Jul 17, 2015 15:29:33 GMT -5
Well, it looks like a Minarelli design. I don't have much experience with the Mina clone motors though. But from the pictures that I saw of the Honda motor, I know it's not that. There is still the Morini style motor and I have zero experience with those or what they look like. So, it's possible to be a Morini motor...?? SO you think that Malossi super 9 LC bbk will be just fine? |
|
|
|
Post by spaz12 on Jul 17, 2015 15:34:21 GMT -5
I can't commit to say what it is. I believe Elektrey has a Morini motor so I think he or someone else should see it as well.
I have to leave for an hour, but I'll be back.
|
|
|
|
Post by spaz12 on Jul 17, 2015 16:45:25 GMT -5
|
|
|
|
Post by tiny on Jul 17, 2015 17:30:27 GMT -5
|
|
|
|
Post by tiny on Jul 17, 2015 17:32:41 GMT -5
|
|
|
|
Post by spaz12 on Jul 17, 2015 18:15:51 GMT -5
The more I look at the front of that motor, where the cylinder goes, the more I think it's a variation on the Minarelli. Easy way to solve it though for sure would be to take a Mina cylinder and see if it fits on there. Maybe a friend or a nearby shop has an old junk one lying around that you can have, or borrow so that you can test this?
But I wonder, how big is the small end bearing in the connecting rod? This could cause a slight problem if it's not a 10 or 12mm.
|
|
|
|
Post by sai on Jul 17, 2015 19:41:17 GMT -5
Kymco forum = dead end, no one responded |
|
