|
|
Post by mistervon on Mar 23, 2016 18:42:09 GMT -5
Spaz check my pic I posted with the hose circle in red. It's a short hose that comes off the carb, it's the vac line if so how do I hook it up or do even need it? Please confirm.
|
|
|
|
Post by spaz12 on Mar 23, 2016 18:44:59 GMT -5
I saw it but I don't see where on the carb it's coming from. You gotta get it from a different angle or something.
|
|
|
|
Post by mistervon on Mar 23, 2016 18:47:29 GMT -5
It's a vertical minarelli. The hose is coming from like the bottom end of the carb. I will have better pics tommorrow, it's night here. If anybody else what to chime in your welcome too...
|
|
|
|
Post by spaz12 on Mar 23, 2016 18:51:42 GMT -5
Then it's most likely the drain/overflow
|
|
|
|
Post by mistervon on Mar 23, 2016 18:57:05 GMT -5
Um that's interesting. So do I plug up the other 2 ports on the fuel valve? It didn't come pre plugged from the owner. It was only attached to the tank line at the time of purchase.
|
|
|
|
Post by spaz12 on Mar 23, 2016 18:58:50 GMT -5
Um that's interesting. So do I plug up the other 2 ports on the fuel valve? It didn't come pre plugged from the owner. It was only attached to the tank line at the time of purchase. give me a minute and I'll edit your picture |
|
|
|
Post by mistervon on Mar 23, 2016 19:02:54 GMT -5
Ok
|
|
|
|
Post by spaz12 on Mar 23, 2016 19:06:53 GMT -5
 The vent does not need to be hooked to anything. |
|
|
|
Post by spaz12 on Mar 23, 2016 19:10:28 GMT -5
The vacuum comes from the carburetor btw.
|
|
|
|
Post by dan50 on Mar 23, 2016 19:10:34 GMT -5
The vin number was on the title. But the vin on the scoot on the front part ain't the same. If that's even the vin. These scooters are rare imports. But I think they use the 1e40qmb engine. What's yours got? Engine is a 1E40QMB. That's why I bought it. 2t, cheap in great condition with 150km on the OD. Needed carb work and she runs good. Haven't been able to get it registered. MI requires regestration, $15 for 3 years. I can't find a VIN anywhere on the scoot. There is a number beginning with "AS" on the rear of the CVT cover. I think I'll use that number for the VIN so I can register it. |
|
|
|
Post by mistervon on Mar 23, 2016 19:20:26 GMT -5
Interesting mine say AM something I'll check again tommorrow. So what about the vac line Spaz?
|
|
|
|
Post by spaz12 on Mar 23, 2016 19:25:01 GMT -5
Interesting mine say AM something I'll check again tommorrow. So what about the vac line Spaz? It should come from the front of the carb, towards the cylinder. |
|
|
|
Post by mistervon on Mar 23, 2016 19:29:54 GMT -5
You are correct. Now we getting some where lol. Next, is this the vac line doesnt go on the nipple as you would expect it would. Now how do I fix that? Is suppose to be forced on?
|
|
|
|
Post by spaz12 on Mar 23, 2016 19:31:11 GMT -5
Is there a nipple/barb under the the power supply to the enricher? Where I circled it... A vacuum hose is usually right there.  |
|
|
|
Post by spaz12 on Mar 23, 2016 19:33:06 GMT -5
You are correct. Now we getting some where lol. Next, is this the vac line doesnt go on the nipple as you would expect it would. Now how do I fix that? Is suppose to be forced on? Show it who's the boss |
|
