gutiwarrior
Scoot Enthusiast
Malaguti F12 Project Wife
Posts: 160
|
Post by gutiwarrior on Apr 2, 2021 20:05:15 GMT -5
|
|
gutiwarrior
Scoot Enthusiast
Malaguti F12 Project Wife
Posts: 160
|
Post by gutiwarrior on Apr 2, 2021 20:08:20 GMT -5
|
|
|
|
Post by Zino on Apr 3, 2021 7:13:01 GMT -5
Guti
Took a look at your other videos nice work .
That Athenao evo flying down the road You can hear the buzz from 1/2 block away .
|
|
gutiwarrior
Scoot Enthusiast
Malaguti F12 Project Wife
Posts: 160
|
Post by gutiwarrior on Apr 13, 2021 9:47:30 GMT -5
The Yamaha vino is back running again. City 16 exhaust, s6 street race top end, same intake and 19mm carb. Polini 3g variator and clutch. Running like a bat out of hell😎
|
|
|
|
Post by Zino on Apr 13, 2021 18:16:32 GMT -5
Its hilarious that your de-tuned slower Vino now probably still does 65mph .
You have shown us how far you can take a vino 71 mph is just ridiculously fast
|
|
gutiwarrior
Scoot Enthusiast
Malaguti F12 Project Wife
Posts: 160
|
Post by gutiwarrior on Apr 13, 2021 18:27:03 GMT -5
Honestly it went around 74 with the racing setup and the c20 exhaust. But yea. Haha it still goes for a street race setup. Just takes longer to get there but I’m working that out  |
|
|
|
Post by oldgeek on Apr 13, 2021 18:50:23 GMT -5
gutiwarrior So where is the EVO? Or was it just tooo much to handle on the Vino?
|
|
|
|
Post by Zino on Apr 13, 2021 20:29:43 GMT -5
He swapped it to his wifes malaguti so she had more zoom zoom I believe
|
|
gutiwarrior
Scoot Enthusiast
Malaguti F12 Project Wife
Posts: 160
|
Post by gutiwarrior on Apr 14, 2021 1:54:00 GMT -5
gutiwarrior So where is the EVO? Or was it just tooo much to handle on the Vino? Now on the f12. S6 currently back on the vino. Still goes 65 or so haha |
|
|
|
Post by ziptiejones on Oct 11, 2023 14:35:10 GMT -5
Do you think that a full islander front end would work for the disc swap? I've got a good hook up on parts at a local shop I used to work at and I'm wondering if it would be cost effective to just have them order everything for the front and then I can piece together the cylinder and a few other odds n ends from what they keep in stock.
|
|
