|
Post by milly on May 16, 2021 12:53:47 GMT -5
|
|
|
Post by aeroxbud on May 16, 2021 14:50:00 GMT -5
That cleaned up pretty good. Might have to change that number plate for an MOT.
|
|
|
Post by milly on May 17, 2021 13:09:55 GMT -5
Played a little today but won't rev high, did notice immobilizer led didn't flash so maybe need a bypass immobilizer unit off eBay.
|
|
|
Post by pinkscoot on May 17, 2021 15:27:10 GMT -5
I believe that is how you know the immobilizer isn't working, starts but won't rev. What does the diaphragm look like?
|
|
|
Post by geoffh on May 17, 2021 15:38:02 GMT -5
That number plate looks fine to me :'(I,ve been to Hale today (rich and effluent area) there,s hardly any of the Bentleys ,lambos etc that have "legal" plates,one rule for us etc. Geoff
|
|
|
Post by milly on May 17, 2021 18:39:06 GMT -5
|
|
|
Post by milly on May 17, 2021 18:39:52 GMT -5
I believe that is how you know the immobilizer isn't working, starts but won't rev. What does the diaphragm look like? Diaphragm looks ok.
|
|
|
Post by milly on May 18, 2021 17:40:28 GMT -5
Changed out spark plug today. I just love changing et4 plugs not!
|
|
|
Post by aeroxbud on May 18, 2021 18:35:34 GMT -5
And yet you keep buying them. 😂
|
|
|
Post by milly on May 19, 2021 13:06:24 GMT -5
Changed front tyre dated 2002 . Filled with dried out slime like a dust storm it was. Lot of rim cleaning to do but on. Await the bypass immobilizer now
|
|
|
Post by pinkscoot on May 19, 2021 16:02:38 GMT -5
Changed out spark plug today. I just love changing et4 plugs not! You really need to get your Granddaughter wrenching so that she can do that for you. Her tiny hands could reach right in there no problem.
|
|
|
Post by milly on May 21, 2021 12:51:26 GMT -5
Today I tried new bypass immobilizer nada. Back on with the duff one and find another that works. Other one gone back. Put on side stand club hammered back centre stand and to the back of the workshop
|
|
|
Post by milly on May 25, 2021 15:18:51 GMT -5
|
|
|
Post by milly on May 26, 2021 8:27:16 GMT -5
Right back together all working. Just awaiting the new £12.99 carb see how that works. One problem high beam warning light not working but buggered if I am taking it apart again
|
|
|
Post by aeroxbud on May 26, 2021 12:42:35 GMT -5
Right back together all working. Just awaiting the new £12.99 carb see how that works. One problem high beam warning light not working but buggered if I am taking it apart again I could send you a bulb if that's all it is. 🤔
|
|