|
|
Post by milly on Jul 10, 2021 14:36:15 GMT -5
Well the thing now goes forward and stops and don't lock when pushed backwards now had chance put new disc pads in. Think the old a little bit worn. Still no sign of relay yet so order from elsewhere me thinks.   |
|
|
|
Post by milly on Jul 12, 2021 2:35:00 GMT -5
Screen is on this morning . Only need new relay to arrive and can put horncast back on.  |
|
|
|
Post by milly on Aug 25, 2021 12:45:28 GMT -5
Well changed belt and rollers been sitting a week no spark. Today put back on a spare factory immobilizer with a coded key both red and blue. Great spark. Took road test and sputtered all to town and back Found engine to chassis lead very slightly loose after noticing sluggish turn over on fully charged battery. Tightened and road test still same. Changed coil better spark. Decided to finally make hole in chassis so I can access the spark plug easier and try new one. Job done road test in a bit.   |
|
|
|
Post by milly on Aug 25, 2021 14:26:49 GMT -5
Poop immobilizer needed or bypass one. Damn hopefully find a cheap one somewhere no pennies to play with at moment and cannot tax the 50cc till V5 arrives, was going for ride out tomorrow with son.
|
|
|
|
Post by milly on Aug 30, 2021 13:30:27 GMT -5
Well surprise, surprise tagged in the old bypass immobilizer and lo and behold brmmmm it works again. Now to find out what's wrong with the wiring  |
|
|
|
Post by milly on Sept 1, 2021 6:14:42 GMT -5
Road test showed it's still sputtering so off with that bypass immobilizer and try one off eBay which is used but working.
Even if problem elsewhere always good to have a spare bypass immobilizer.
|
|
|
|
Post by milly on Sept 2, 2021 16:35:26 GMT -5
Took off the panels today had to drill out one glove box screw already to put on the new brake cable and check wiring in the light .   |
|
|
|
Post by milly on Sept 3, 2021 17:51:58 GMT -5
Well the immobiliser arrived from eBay or rather the envelope did with nothing in it.😐
Plus ordered a decent wiring loom.
|
|
|
|
Post by milly on Sept 13, 2021 17:13:35 GMT -5
New immobilizer arrived no joy didn't work but had some from them before which have been a bit hit and miss. Got one arriving from admin of the Vespa ET4 forum /group on Facebook with locks and the red and two blue keys tomorrow hopefully. So today removed my the ignition key barrel ready to install the new lock pulled the clip gently so would not come all the way out. After lock removal I had to wiggle the clip slightly and it popped out. As Robot of Scooter West says on his video of doing the barrel if clip comes out. "Good luck with that" 😐 That was last night today I eventually got it in.  |
|
|
|
Post by captincvmn on Sept 13, 2021 20:53:42 GMT -5
Milly you are in here talking to yourself. Poor guy. Imma gonna bookmark this folder so you’re not so lonely here. I’ve been chasing electrical gremlins myself the last two weeks. Finally found a bad in-line 12v fuse to blame.
|
|
|
|
Post by milly on Sept 14, 2021 4:58:33 GMT -5
Milly you are in here talking to yourself. Poor guy. Imma gonna bookmark this folder so you’re not so lonely here. I’ve been chasing electrical gremlins myself the last two weeks. Finally found a bad in-line 12v fuse to blame. I get quite use to talking to myself at work with the youths and kids when all that starts up again captincvmn that is when we allowed to after they changed there covid rules round here. ☺️ |
|
|
|
Post by milly on Sept 14, 2021 14:59:48 GMT -5
Today another proper immobilizer arrived and still the same old same old. Very frustrated with it all but conversed with the forum owner/admin on Facebook of vespa et4 and et2 group who sent me the immobilizer and has given me a few useful pointers.
So tomrrow I shall mainly be removing the air box and checking behind there and a few other places after job hunting.
|
|
|
|
Post by captincvmn on Sept 14, 2021 16:10:45 GMT -5
Electrical gremlins are the worst.
|
|
|
|
Post by milly on Sept 15, 2021 15:28:38 GMT -5
Well would you believe it, went and picked up third new plug I had forgotten I ordered locally put it in and vroom run sweet on stand with no sputtering. Got to get time for a roadtest in morning at some point.
|
|
|
|
Post by milly on Sept 16, 2021 8:25:10 GMT -5
It wasn't till I got to the 6th local place I found a plug cap today the autoparts place don't sell them anymore and one garage said I bought their last one last year.
|
|
