|
|
Post by treylaw on Sept 4, 2014 1:30:44 GMT -5
im trying to biuld my dream scooter its peace motors tpgs 824 i like the look of the body i realy hate bikes have lots of plastic junk paneling every ware thats why i like this bike why it has a 50cc 1p39 qmb i want to keep the original engine block with it im wanting to know what options i have in the way of big bore kits and other parts im not sure if it has 64 or 69 mm valves [please provide links to parts i perfer amazon] and what i can do to get the most out of it my end goal is a top speed of at least 60 miles per hour and have it do 0-35 in 5 seconds and put some form of turbo and some kind of dry nitrous kit some kind of rpm guage on it and haveing at least 60 mpg i am 280 pounds and been fooling with lawn mowers and cars since i was 12 im 17 now i know how to work on the scooter but im haveing issues with confirming that im buying the right pars before i click checkout
|
|
|
|
Post by Clank on Sept 4, 2014 4:40:41 GMT -5
60 mph on 10" wheels is pushing the upper limits of a 50cc scoot. Unless you do some serious suspension mods it's really not safe imo.
|
|
|
|
Post by 2TDave on Sept 4, 2014 5:11:53 GMT -5
That's asking A lot! What's your budget?
|
|
|
|
Post by katastroff on Sept 4, 2014 6:08:44 GMT -5
Its doable, but only if you swap the engine for a 125cc. You might be able to get a 50cc to run at 60mph, but it wont be running for long.
|
|
|
|
Post by treylaw on Sept 4, 2014 6:19:50 GMT -5
dave 500 bucks gonna be the budget to get the major stuf like the bbk upgraded tyranny cvt wiring new front wheel the ownly goals that must be made are the top speed and and fuel economy
Clank i plan to have a larger wheel in the front and make cross between a lowrideing chopper a scooter and a drager i can enter in time trails at the local drag strip i want to her be like no other to shes gonna be my every day bike as well
|
|
|
|
Post by treylaw on Sept 4, 2014 6:21:57 GMT -5
katastroff i wanting to put a bbk and upgrade the cvt and tranny
|
|
|
|
Post by 2TDave on Sept 4, 2014 6:27:22 GMT -5
60+ mph out of a 139 case is IMO unrealistic with a $500 budget. 50mph maybe. A 150cc swap would be needed, again IMO. Or do some fab work and put a 2t in it and $500 in parts on it and you'll get there. But your budget will be blown because you'll have to buy a 2t.
|
|
|
|
Post by treylaw on Sept 4, 2014 6:40:20 GMT -5
imo 2t explane please dave
|
|
|
|
Post by treylaw on Sept 4, 2014 6:42:08 GMT -5
dave as being 17 with just a learners permit i cant legally put a 150 cc engine in still have be considered in the moped exception
|
|
|
|
Post by treylaw on Sept 4, 2014 6:46:14 GMT -5
and as she sits dave im geting mostly 45mph out her when shes runing mos of this being done cus im tired of 20 minute fixes that last 2 weeks and something else breaks and if im gonna rebuild her im gonna rebuild better than when i got her
|
|
|
|
Post by 2TDave on Sept 4, 2014 7:02:03 GMT -5
2t= two stroke.
|
|
|
|
Post by treylaw on Sept 4, 2014 7:09:28 GMT -5
no way i like 4 stroke engines with there nice ungoofy looking mufflers
|
|
|
|
Post by 2TDave on Sept 4, 2014 7:33:09 GMT -5
Okay. If you can get 60+ gps mph,60 mpg and a reliable daily driver out of your 139 for $500 you will have done what no one else I know of has done.
|
|
|
|
Post by treylaw on Sept 4, 2014 7:59:31 GMT -5
dave on the right roads like i said she will do 45 im gonna rase the budget to 1k it will just be 4-8 paychecks now instead of 1-3
|
|
|
|
Post by treylaw on Sept 4, 2014 8:03:04 GMT -5
now tell me what am gonna have to do to meet my goals
|
|
