|
Post by floyd2133 on Feb 1, 2017 17:09:35 GMT -5
Sorry, I cant open the last 2 vids. The intake valve is popping with no crank
|
|
|
Post by floyd2133 on Feb 1, 2017 17:06:00 GMT -5
|
|
|
Post by floyd2133 on Feb 1, 2017 17:00:29 GMT -5
From the vid, almost sounds like the valves are out of adjustment. So I changed valves now they are making a popping sound vimeo.com/202110184
|
|
|
Post by floyd2133 on Feb 1, 2017 16:30:33 GMT -5
From the vid, almost sounds like the valves are out of adjustment. You were right vimeo.com/202104911
|
|
|
Post by floyd2133 on Feb 1, 2017 14:06:56 GMT -5
From the vid, almost sounds like the valves are out of adjustment. I will check the valves then get back to you
|
|
|
Post by floyd2133 on Feb 1, 2017 14:03:21 GMT -5
Sounds like a bad crank to me. A bad crank?
|
|
|
Post by floyd2133 on Feb 1, 2017 13:52:13 GMT -5
So I put n a Bbk 3 months ago I have been waiting on a back tire to test it cause mine was busted finally got tire. It cranks and idles however it won't move when I sit on it . N tire only moves at 3 rpm vimeo.com/202080957
|
|
|
Post by floyd2133 on Jan 22, 2017 16:07:37 GMT -5
Hi folks o have decided to change this post to starter malfunction kick start help. Because I am willing to give up on getting screw out and jus making my kick start work however it grinds I have changed every component in the kick mechanism however I'm not receive any luck
|
|
|
Post by floyd2133 on Jan 16, 2017 18:48:23 GMT -5
Actually it is outside. I have removed the fuel line it drips and stoped I remove vacuum line then The fuel line spurred out a stream of water now they are sitting in a cup I will go check them in about 45 min
|
|
|
Post by floyd2133 on Jan 16, 2017 18:33:07 GMT -5
So remove the fuel line to the carb and see if it's leaking? Because it should only come out under air pressure from the crank or electric start?
|
|
|
Post by floyd2133 on Jan 16, 2017 18:24:21 GMT -5
I changed to my spare carb and filled up with fuel. There were no sign of leakage. However my starter bolt is still stuck inside case. My c clamp mid worked yesterday but it won't hold the starter in place to day to turn over engine correctly.
I will have to drill out the bolt
Sighh
|
|
|
Post by floyd2133 on Jan 16, 2017 10:52:45 GMT -5
So being that it would not leak if petcock was closed;How will I know if fuel petcock needs to be changed? Also does it appear that my fuel filter is installed correctly I never see fuel inside of it.
|
|
|
Post by floyd2133 on Jan 16, 2017 10:43:07 GMT -5
Ok I will do this jus make sure we note that fuel came from back of carb .
|
|
|
Post by floyd2133 on Jan 16, 2017 9:07:56 GMT -5
|
|
|
Post by floyd2133 on Jan 16, 2017 8:16:45 GMT -5
|
|