|
Post by badpumpkin on Jul 30, 2016 19:58:48 GMT -5
Oooohhhh mylanta, this has happened to me literally a million times. Find strong plastic, like pill bottle lids, or togo cup lids. Measure diameter and cut with snips. Use a dime or something as reference. Drill your two holes. The size of the wires. Snip outside to the holes, slide wires in and place into socket. Make a few of these, and keep an eye out for thick plastics or nylon. It's a type of plastic. Make several.
|
|
|
Post by badpumpkin on Jul 28, 2016 20:00:52 GMT -5
Coil on plug I think is the best way to go, do the after 2000 ford ones
|
|
|
Post by badpumpkin on Jul 27, 2016 22:50:38 GMT -5
Hey, if you are handy try installing a coil on plug unit, they will ignite almost all fuel air
|
|
|
Post by badpumpkin on Jul 27, 2016 22:29:54 GMT -5
Hey, for what it's worth, is the little round piece of plastic that holds the electric al leads broke??Or cracked?Mine have, a lot, Oh they are at the bulb base in the socket.Its not to difficult to make new ones.
|
|
|
Post by badpumpkin on Jul 24, 2016 21:45:23 GMT -5
I encourage those who have the technical ability to try these, I have had good results on my orange 50cc taotao, and I will install one on my ruby one. Coil on plug units are from cars, they throw a ton of electricity to the plug. It takes a little bit of measuring and I clamped a bracket to the frame and then bolted the c.o.p to the bracket. 2000 and after ford units work well.
|
|
|
Post by badpumpkin on Jul 22, 2016 22:50:18 GMT -5
Buy reverse drill bits and easy out screw extracters. But,the other scoot riders are right, get a new carb. A good carb 50.00 like fromm goofit, not a 20.00 from china .Stick with keihin
|
|
|
Post by badpumpkin on Jul 22, 2016 10:10:07 GMT -5
After new rivets, put a stainless steel clamp around them
|
|
|
Post by badpumpkin on Jul 22, 2016 10:06:47 GMT -5
I put a coil on plug on my orange scooter, no more start issues
|
|
|
Post by badpumpkin on Jul 21, 2016 7:41:11 GMT -5
Absolutely COOL,I'll take a dozen.
|
|
|
Post by badpumpkin on Jul 16, 2016 13:26:16 GMT -5
Try a coil on plug unit, I put one on and have great results
|
|
|
Post by badpumpkin on Jul 15, 2016 21:37:25 GMT -5
Hey, I put the keihin with 33,85 jets back on/in, I pulled off performance wire and coil and put coil on plug unit on....its alive!!!! I put 10 miles on tonight and this is after it not running for a week, I think c.o.p.s are the way to go!
|
|
|
Post by badpumpkin on Jul 15, 2016 20:18:33 GMT -5
Hey, for what it's worth, I put a coil on plug,c.o.p.unit on tonight, IT WORKS GREAT, I'VE got a stock 49cc tao tao, with keihin 18mm cvk 33 85 jets
|
|
|
Post by badpumpkin on Jul 15, 2016 6:57:30 GMT -5
Check stator to pickup gap,check voltage out of stator,check all connections,all how to can be found here
|
|
|
Post by badpumpkin on Jul 14, 2016 20:00:27 GMT -5
The jets in the tao tao carb are imprinted with 16,30,What do you think, does china have a different jet measure system
|
|
|
Post by badpumpkin on Jul 14, 2016 19:40:10 GMT -5
I have stock tao tao 49cc, stock carb with 16,30 jets, I replaced it with keihin 18mm 33 ,85 it won't run.Do I down the jet size,
|
|